Skip to Main Content


Case Study

Intel Achieves EMI Simulation of an Entire Server with Help from Ansys and EMA

Electromagnetic interference (EMI) is a common problem in the electronics sector, especially as IC devices continue to get smaller and customers expect everything to work faster. Having so many electronic components in small spaces increases the risk of EMI. Intel was looking for a way to simulate the interactions and interference of a whole server at once as the ultimate way of understanding their products.  


Simulating an entire server at once had never been done before. To do so, Intel requested greater interoperability and functionality of HFSS, SIwave, and EMA3D Cable software in the following ways:

  • EMA3D Cable to import solved fields from SIwave and HFSS for Intel’s electronic device sub-components. Once the fields were imported, Intel needed the ability to rotate and translate the position of the sub-components within the enclosure. 
  • Intel often used EMI absorbing tapes, so EMA3D Cable must have an ability to simulate thin, magnetically lossy materials. 
  • Intel needed EMA3D to have a sub-grid capability to increase the resolution of key parts of the simulation geometry. 
  • EMA3D Cable is a time-domain simulation product. However, Intel needed the capability to simulate frequency-dependent materials.

Engineering Solution

Over the course of two years, Ansys and EMA worked closely with Intel engineers to modify the EMA3D software, with validation by Intel at each step. They improved the meshing speed by substituting a voxel grid mesh instead of the traditional tetrahedra used by the finite element method, resulting in a forgiving mesh that can be completed much faster than before. To model the cables connecting PCBs, EMA3D combined two solvers: the solver for the 3D structure that uses the voxel grid mesh, and a solver based on multi-conductor transmission line theory for the cables. This combination yields a onedimensional line that shows the cable placement and a 2D cross section that reveals what's inside that one-dimensional line. 


Intel engineers now have the ability to:

  • Simulate an entire server, simulating all 6 cards in a server at once, as opposed to having to simulate one card 6 separate times previously 
  • Create a subdomain inside a domain so engineers can define a smaller cell size and mesh better in areas where a smaller mesh is needed 
  • Use EMA3D Cable to simulate the cabling and the thin wiring and then integrate both solutions together 
  • Simulate the EMI effects of frequency-dependent materials in electronic components

당신을 위한 Ansys 솔루션을 알아보십시오.


* = 필수 항목

문의해 주셔서 감사합니다!

여러분의 질문에 답변해 드리기 위해 최선을 다하겠습니다. Ansys 담당 엽업이 곧 연락을 드릴 것입니다.

바닥글 이미지