Skip to Main Content



March 29, 2023

How to Save Your Chips From Electromagnetic Coupling

The increasing demand for electronic products to support multiple functionalities, such as high-speed computing, communication, the Internet of Things (IoT), and more, is the driving force for designing ultra-high-speed chips with a reduced form factor.

What is Electromagnetic Coupling?

An electromagnetic wave consists of electric and magnetic waves running perpendicular to each other. Electromagnetic interference (EMI) occurs because of a close relationship between electricity and magnetism. Each factor responds differently to frequency, voltage, current, and distance, but with recent advancements in designing electronic systems, the electromagnetic field (E-field) factor is mainly responsible for interference. Electromagnetic coupling occurs when the E-field factor produced by one circuit element, such as a transistor, interacts with another circuit element. This interaction results in the transfer of energy between the two elements, which affects the operation of the integrated circuits.

Electromagnetic waves

EMI can also occur because all electrical conductors act as an antenna at high frequencies. As the switching speed of transistors increases, the probability of electromagnetic coupling increases, and transistors become a major source of electromagnetic noise. The radiated signals should be below an accepted level to ensure the functionality and performance of the chip.

Causes of EMI Coupling

To determine the cause of EMI coupling, it’s most important to understand how it is coupled from source to receiver. There are four methods of EMI coupling: conduction, radiation, capacitive, and inductive.


When EMI is emitted along conducting wires or electrical routes in a design that connects the source and receiver, it is considered conductive coupling. Conductive coupling often happens on power distribution lines. Conductive coupling can be either common mode or differential mode conduction, depending upon the connection technique. One example of this is experiencing television disturbance after turning on a mixer or other appliance at home, which happens because both are connected to the same electrical line. The most effective solution to conduction coupling is shielding the wires and using filters.


EMI through radiation doesn’t require any physical connection between the source and receiver. Radiation coupling usually occurs at higher frequencies, when the unwanted electromagnetic signals are radiated from the circuit operating at high frequency and received by a different chip or circuit nearby. For example, when you take off or land in an airplane, you are requested to turn off your electronic devices because electromagnetic radiation from electronics can interfere with airplanes’ electronic devices and systems. Radiation coupling can disrupt proper functioning or cause malfunction.

Capacitive Coupling

The electric field component is responsible for capacitive coupling, whereas magnetism is responsible for inductive coupling. Capacitive coupling happens when two conductors are running very close to each other. The changing voltage in the source capacitively transfers the charge to the victim conductor. This mostly happens on closely routed signals on the chip, in which the electronic circuits are closely packed.

Inductive Coupling

Inductive coupling depends upon the magnetic field generated by the source around the victim conductor. The changes in the magnetic field results in inducing unwanted current in the nearby victim conductor. Inductive coupling occurs when two circuit elements are in close proximity to each other but are not directly connected.

How to Mitigate the Effects of EMI Coupling

The fast growth of electronic technologies in the last few years is making designers create compact, efficient, and very high-speed chip designs. This has led to major challenges for chip designers, one of which is EMI issues. EMI directly affects the performance and reliability of chips. The E-field factor of EMI is mainly responsible for the coupling of unwanted signals between the circuits.

To mitigate the effects of electromagnetic coupling in chip design, designers use multiple techniques. Shielding is one popular technique to avoid electromagnetic interference in high-speed chips like RF ICs. Shields absorb or block the E-fields, preventing unwanted signals from interacting with sensitive circuit elements such as transistors, antennae, or other active devices. Shielding can be implemented in a number of ways, including the use of enclosures made from conductive materials or the use of conductive materials as layers within a circuit board.

Another technique for mitigating electromagnetic coupling is using predefined high-speed layout techniques and advanced simulation methods. Since chips are designed at very high speed and use high data rate signals, these techniques aren’t enough to ensure EMI compatibility (EMC). It’s important to predict the electromagnetic coupling behavior of integrated circuits using advanced simulation methods. Ansys provides a complete suite of electromagnetic simulation tools that can synthesize inductors and predict the EMI behavior of RF ICs and sign-off. The automation and modeling capabilities of the tools enable designers to design at faster data rates with higher fidelity.

Electromagnetic coupling is an important issue in advanced high-speed chip designs, as it can affect the performance and reliability of electronic circuits. It’s always important to follow layout guidelines and use shields, filters, and other devices, but predicting its behavior in the real world can only be possible through use of simulation tools. Ansys provides best-in-class technology to analyze EMI in order to produce high-quality chips that meet the performance and reliability requirements of their intended applications.

By understanding the principles of electromagnetic coupling and implementing effective techniques to mitigate its effects, chip designers can produce circuits that are able to operate reliably and achieve their desired performance levels.

To learn about EMI’s role in automotive applications, click here. Visit this page to learn more about Ansys RaptorH, Ansys’ high-capacity EM simulation tool.

查看 Ansys 的服務與產品


* = 必填欄位


We’re here to answer your questions and look forward to speaking with you. A member of our Ansys sales team will contact you shortly.

Footer Image