Skip to Main Content

Ansys DesignModeler 
기본교육 

소개

본 교육에서는 해석 대상의 형상을 모델링 할 수 있는 Design Modeler에 대한 사용방법을 제공합니다. Workbench의GUI를 이해하고, 단일 프로젝트를 구성해봄으로 Workbench의 구성요소와 작업절차를 이해하고, Design Modeler을 이용하여 비교적 단순한 형상에 대한 sketch를 이용한 직접 모델링 작업과 복잡하고 실제적인 형상을 다루기 위한CAD 데이터를 이용한 형상 모델 과정을 연습합니다.

대상

  • 해석 대상의 형상을 모델링 할 수 있는 SpaceClaim에 관심이 있는 연관분야의 대학(원)생 및 엔지니어.

Learning Path

introduction-to-ansys-designmodeler-pathway.png

Learning Outcome

Following completion of this course, you will be able to;

  • Navigate within the graphical user interface
  • Create, modify and/or cleanup their geometry in preparation for their analyses
  • Generate 2-D sketches and convert them into 2-D or 3-D models
  • Modify 2-D and 3-D geometry
  • Import existing CAD geometry into Ansys DesignModeler
  • Create line bodies and their cross sections in preparation for FE beam analysis
  • Create surface bodies in preparation for FE shell analysis
  • Model assemblies
  • Utilize parameters

Available Dates

Time Duration Event Type Location Language Course Cost Registration

Learning Options

Training materials for this course are available with a Ansys Learning Hub Subscription. If there is no active public schedule available, private training can be arranged. Please contact us.

Agenda

This is a 1 day classroom course covering both lectures and workshops. For virtual training, this course is covered over 2 x 2 hour sessions, lectures only.

Live Classroom Day 1

  • Module 01: Core Skills
  • Workshop 1.1: DesignModeler  Basics
  • Workshop 1.2-FEA: Pattern
  • Workshop 1.2-CFD: Enclosure
  • Module 02: Geometry Creation and Modeling
  • Workshop 2.1: Sketching
  • Workshop 2.2: Modeling
  • Module 03: Geometry Cleanup, Modification
  • Workshop 3.1-CFD: Geometry Cleanup
  • Workshop 3.1-FEA: Geometry Cleanup
  • Module 04: Parameterization
  • Workshop 4.1-CFD: Parametric Mixing Tank
  • Workshop 4.1-FEA: Automotive AERO
  • Introduction to Advanced Topics
  • Module 05: Beam and Shell Modeling  (Primarily for FEA Users)
  • Workshop 5.1: Beam and Shell Modeling
  • Workshop 5.2: Bracket
  • Workshop 5.3: Beam Modeling
  • Workshop 5.4: Shell Modeling
  • Module 06: Modeling for CFD  (Primarily for CFD Users)
  • Workshop 6.2: Pulley