Skip to Main Content
무료 평가판

Ansys CFX Getting
Started 교육

소개

이 과정에서는 Ansys CFX 소프트웨어를 사용하여 스스로 기본적인 CFD(Computing Fluid Dynamics) 시뮬레이션을 수행하는 데 필요한 필수 기술을 설명합니다. 강사 데모 및 실습 워크샵에서는 Ansys SpaceClaim의 CAD 모델 작업, Ansys Meshing의 고품질 CFD 메쉬 제작, Ansys CFX에서 CFD 시뮬레이션 수행의 모든 측면을 다룹니다. 과정 모듈은 CAD(Ansys SpaceClaim), 메싱(Ansys Meshing) 및 솔버(Ansys CFX) 항목으로 구성되어 있으며, 이 세 가지 주제 각각에 대해 학생들은 다른 CFD 문제의 End-to-End 워크플로우를 경험하게 됩니다. 

대상

  • Ansys CFX를 이용하여 CFD시뮬레이션을 수행하는데 관심이 있는 연관분야의 대학(원)생 및 엔지니어.
SUBSCRIBER LOG IN
Subscribe Now

Learning Outcome

Following completion of this course, you will be able to;

  • Understand the end-to-end procedure of simple CFD problems using Ansys CFX
  • Learn how to use the most important functions of  Ansys SpaceClaim Direct Modeler
  • Learn how to  create high quality CFD meshes with Ansys Meshing
  • Become familiar with the end-to-end workflow of simple CFD problems using Ansys CFX

 Available Dates

Learning Options

Training materials for this course are available with a Ansys Learning Hub Subscription. If there is no active public schedule available, private training can be arranged. Please contact us.

Agenda

This is a 3-day classroom course covering both lectures and Demos. For virtual training, this course is covered over 5 x 2-hour sessions lectures and demos only.

Virtual Classroom Sessions 1 & 2 / Live Classroom Day 1 Virtual Classroom Session 3 & 4 / Live Classroom Day 2 Virtual Classroom Session 5 / Live Classroom Day 3

Virtual Classroom Session 1

  • Module 1: Overview of CFD
  • Lecture 1.0: Introduction to Ansys
  • Lecture 1.1: Introduction to Ansys Workbench
  • Lecture 1.2: Overview of CFD Process
  • Demo 1: Flow in a Mixing Tee
  • Workshop 1: Flow in a Mixing Tee
  • Module 2: Ansys Fluid Simulation Basics
  • Lecture 2.1: Ansys SpaceClaim Essentials
  • Demo 2.1: Flow Distribution in an Air Manifold (SCDM)
  • Lecture 2.2:Ansys Meshing Essentials
  • Demo 2.2: Flow Distribution in an Air Manifold (Meshing)
  • Lecture 2.3: CFX User Interface and Workflow
  • Demo 2.3: Flow Distribution in an Air Manifold (CFD)
  • Workshop 2: Flow Distribution in an Air Manifold

Virtual Classroom Session 2

  • Module 3: Defining Fluid Simulations
  • Lecture 3.1: Basic Operations in Ansys SpaceClaim
  • Demo 3.1: Mixing Hot and Cold Streams in a Mixing Elbow (SCDM)
  • Lecture 3.2: Global Mesh Control
  • Demo 3.2: Mixing Hot and Cold Streams in a Mixing Elbow (Meshing)
  • Lecture 3.3: Setting Up Physics
  • Demo 3.3: Mixing Hot and Cold Streams in a Mixing Elbow (CFD)
  • Workshop 3: Mixing Hot and Cold Streams in a Mixing Elbow

Virtual Classroom Session 3

  • Module 4: Postprocessing Fluid Simulations
  • Lecture 4.1: Geometry Handling and Repair
  • Demo 4.1: Tube Bundle (SCDM)
  • Lecture 4.2: Local Mesh Controls
  • Demo 4.2: Tube Bundle (Meshing)
  • Lecture 4.3: Postprocessing
  • Demo 4.3: Tube Bundle Post-processing
  • Workshop 4: Tube Bundle

Virtual Classroom Session 4

  • Module 5:Parameters and Design Points
  • Lecture 5.1: Main Tools, Parameters and Assemblies
  • Demo 5.1: Ball Valve (SCDM)
  • Lecture 5.2: Mesh Methods and Selective Meshing
  • Demo 5.2: Ball Valve (Meshing)
  • Lecture 5.3: Parameters and Design Points
  • Demo 5.3: Parametric Study in a Ball Valve (CFX)
  • Workshop 5: Parametric Study in a Ball Valve

Virtual Classroom Session 5

  • Module 6: Solving
  • Lecture 6: Solving
  • Demo 6: Solving (Mixing Elbow and Manifold cases)
  • Workshop 6: Solving (Mixing Elbow and Manifold cases)
  • Module 7: Lecture 7: CFD Best Practices
  • Workshop 7: Airfoil
  • Module 8: Lecture 8: Turbulence
  • Module 9: Lecture 9: Heat Transfer
  • Workshop 8: Electronics Cooling
  • Module 10: Lecture 10: Transient Flows
  • Workshop 9: Vortex Shedding