Case Study
產品系列
查看所有產品Ansys致力於為當今的學生打下成功的基礎,通過向學生提供免費的模擬工程軟體。
Case Study
“Ansys Lumerical’s finite-difference time-domain (FDTD) simulation software was the ideal tool to reach our research goals into metalens design quickly and with confidence. It offers unprecedented accuracy, providing simulation results that closely match measured results and the performance needed for our optimization platform."
— Haowen Liang, Lead Investigator / Sun Yat-Sen University
The State Key Laboratory of Optoelectronic Materials & Technology at Sun Yat-sen University set out to develop a metalens with ultrahigh numerical aperture (NA) when front-immersed in oil, enabling subwavelength imaging with higher resolution. A novel hybrid optimization algorithm (HOA) finds optimal designs by iteratively simulating with the finite-difference time-domain (FDTD) method to determine transmission rate and absorption.
The goal of the research was to develop a better metalens with a higher NA and demonstrate that this could be achieved automatically via an optimization platform.
After performing optimization using their HOA platform, the group at Sun Yat-Sen manufactured their design via patterning in a negative resist by electron beam lithography (EBL) and etched by inductively coupled plasma (ICP). The comparison between the measured and simulated results of the normalized intensity distribution of the focal spot in air. The optimization solution based on Ansys Lumerical FDTD resulted in a metalens design with measurements that closely match simulation results regarding focused spot size and efficiency.
我們將在此解答您的問題,並期待與您交流互動。Ansys 的銷售團隊成員會立即與您聯絡。