ANSYS初創公司計劃

ANSYS初創公司計畫為創業者全面提供豐富的模擬套裝軟體,幫助他們以較低成本快速推動企業發展。我們認識到,企業在發展初期總會面臨資金有限和營收過低等問題。我們打造這項計畫的目的在於,您用最低的初始投資即可使用行業最佳的ANSYS模擬解決方案,從而充分發揮企業的無限潛能。全球許多最偉大的公司都從初創公司起步,然後逐漸發展壯大。ANSYS致力於同今天的初創公司攜手合作,積極幫助他們成長為未來的行業領袖。

作為初創公司計畫的合作夥伴,您將能立即獲得ANSYS解決方案,從而為新產品構建虛擬原型。在構建和測試一個物理原型所需的時間內,您可利用模擬技術對這些虛擬原型進行成百上千次的修改和測試,不僅顯著節約時間和資金,同時還讓您的產品設計變得更完美。這種合作讓您能獲得多物理場模擬包的完整產品組合,包括結構和流體包以及電磁包等。更多優勢包括ANSYS市場行銷機遇,以及通過我們的客戶門戶獲得自助支援。

無論您是個人創業者、與不同初創公司合作的孵化器還是生態系統中的其他關鍵參與者,都歡迎通過以下資訊瞭解ANSYS如何在成功路上助您一臂之力。

 


ANSYS Startups
ANSYS Incubators and Accelerators

Startup Program Spotlight

Zunum Aero

Zunum Aero

Zunum Aero manufactures commercial hybrid-to-electric aircraft that are powered by quiet range-optimized powertrain and propulsion technologies. It uses ANSYS simulation software to analyze propulsion components for structural integrity, fluid flow analysis, cooling system design and overall design optimization.

View Case Study

Vector and ANSYS

Vector

Vector, a business startup, is addressing the small spacecraft market for launch vehicles. Because everything must shrink down when you are creating a nanosatellite launcher, engineers were challenged to scale everything while optimizing for a smaller class of payload. They leveraged ANSYS for all of the various fluid flows of the rocket engine including analysis of hot combustion gases in the engine as well as the various cold cryogenic liquids flowing into the engine to understand how they interact with the materials around them.

Watch Video

ARC

ARC

Engineers at the Additive Rocket Corporation (ARC) are using ANSYS Mechanical and ANSYS CFD simulation solutions to reinvent rocket engines using 3D printing based on bioinspired geometries. ARC engineers use ANSYS simulation solutions to innovate complex designs quickly and cost-effectively to revolutionize and democratize spaceflight.

Watch Video

Isotropic

Isotropic

Isotropic Systems has achieved a major technological breakthrough in the design of low-profile antennas. Using the Distributed Solve Option added to ANSYS HFSS, plus high-performance computing, the company can analyze larger and larger portions of its antenna system, run many more design simulations in parallel and reduce the individual node requirements and simulation time by more than two orders of magnitude.

View Case Study

Autorient

Autorient

Autorient targets solutions for positioning and control of autonomous machines, robots and vehicles. Reducing the size and improving the performance of the measurement system are necessary to compete in this market. Read this case study to learn how modeling and simulation can provide a full understanding of the behavior and the mechanical, thermal and electrical properties of these systems.

View Case Study

Polytenna

Polytenna

Polytenna Technologies Inc. is revolutionizing millimeter-wave antennas by making them out of plastics. Engineers used ANSYS HFSS to realize complicated EM structures and predict antenna performance, which can be degraded significantly at these high frequencies. The company saved time and money in terms of personnel resources but also in cost savings due to less re-work.

View Case Study

Edisun and ANSYS

Edisun

Edisun, a business startup, leveraged software accessible through the ANSYS Startup Program to design and test their first product, PV Booster. PV Booster is the only dual-axis rooftop tracker for the commercial and industrial market providing 20% better economics on your installation by making more efficient use of solar panels. ANSYS software allowed Edisun to speed through design cycles, shorten their time to marked, and work very efficiently.

Watch Video

General Fusion

General Fusion

General Fusion has built a world-class Magnetized Target Fusion research and development team consisting of over 50 research and development professionals who have demonstrated the ability to quickly and cost-effectively design, simulate, prototype and test advanced fusion systems.

View Case Study

Winfoor

Winfoor

Rotor blades are causing big problems for wind power industry. They are expensive, heavy and made in one piece. Read this case study to learn how Winfoor used ANSYS simulation solutions to analyze a precise, optimized design to drive the wind industry and make it more competitive as an energy source.

View Case Study

Bioana stent

Bioana

Bioana is dedicated to the design and development of medical technology. Before a medical device can be implanted in a patient, testing must be done to discover its life span of the device, the best choice of material for fabrication, the stresses it must withstand, etc. With simulation, several devices can be tested simultaneously and refined to create an optimized solution.

View Case Study

 HuMoTech Case Study

HuMoTech

HuMoTech engineers used ANSYS Mechanical to achieve a 25 percent weight reduction of the prosthesis end-effector, which allows their device to more accurately emulate a wider range of prosthetic devices. This reduces the design and testing time of prosthetic devices and results in a better fit, which improves the patient’s quality of life, while helping clinicians and researchers to be more effective.

View Case Study

CerebroScope Case Study

CerebroScope

Read this case study to learn how CerebroScope® used ANSYS Electronics Desktop to develop a prototype of their CerebroPatch™, which can be used to detect these CSDs through the scalp so preventive measures can be taken to minimize the damage done by CSDs. Simulation reduced their design time by 75 percent compared to experimental methods, so they could start clinical trials sooner.

View Case Study

volabo GmbH Case Study

volabo GmbH

Learn how VOLABO used multiphysics simulation software to develop the first 48 V high power traction drive, which is 25 percent more efficient than conventional electrical drives and does not need rare earth magnets for production. What makes the ISCAD drive unique is the virtual gearbox that enables the motor to continuously adapt to the load profile and thus make better use of the battery capacity.

View Case Study

Auto Drive Solutions Case Study

Auto Drive Solutions

Auto Drive Solutions is a startup company in Madrid, Spain, focused on disruptive radar positioning systems that are accurate to within 1 cm for railroad and automobile applications. They are using ANSYS SCADE to develop secure and accurate software that meets safety integrity level 4 (SIL 4) certification. SCADE is being used to handle software certification so they can focus on developing the best product with a high return on investment.

Watch Video

Andar Technologies Case Study

Andar Technologies

Millimeter-wave (mm-wave) radar systems for automotive applications will be crucial to the success of autonomous vehicles by aiding in the detection and localization of pedestrians, vehicles changing lanes, and parking and braking events in complex traffic scenarios. Learn how Andar used ANSYS HFSS and other ANSYS solutions for electromagnetic full-wave simulation and circuit design analysis to design a mm-wave radar while saving money and getting to market faster.

View Case Study

LACI

Los Angeles Cleantech Incubator (LACI)

Los Angeles Cleantech Incubator (LACI), is built to commercialize clean technologies and provide technical resources for startups. LACI's partnership with the ANSYS Startup Program gives their startups huge value by providing access to ANSYS simulation tools onsite. This allows their startups to save time, reduce risks around making changes, and accelerate their product development process while saving them money.

Watch Video

SafespillCaseStudy

Safespill Systems

Safespill Systems produces a modular hollow aluminum floor system, with a perforated top surface, that contains spilled liquids and pumps them into designated containment. Using ANSYS Mechanical simulations enabled Safespill engineers to test multiple iterations computationally and ultimately develop a product capable of generating compression forces 75 percent greater than the initial design.

View Case Study


wattron

wattron

Thermoforming is an important polymer production process; the heating of the initial polymer sheet is essential for the quality, quantity and efficiency of the process. Read this case study to learn how watttron developed an innovative heating technology that allows inhomogeneous, precisely defined heating of surfaces on a very small scale. This innovation depends on a powerful algorithm that iteratively updates the temperature profile depending on the results of the thermoforming simulation using ANSYS solutions.

View Case Study


FDX

FDX

FDX produces OsciJet nozzles that emit a sweeping or pulsating jet stream of fluid without any moving parts to save resources by optimizing flow processes. Building and testing prototypes was a bottleneck in their design process, so they used ANSYS CFX and ANSYS Workbench to accelerate the process by a factor of 360, greatly improving their time-to-market.

View Case Study

BoroniteCaseStudy

American Boronite Corporation

American Boronite Corporation manufactures boron nitride nanotubes using a proprietary chemical vapor deposition (CVD) system. To understand the heat and mass transfer occurring during production within its CVD reactors, Boronite uses ANSYS computational fluid dynamics (CFD) simulation software to optimize the efficiency of its continuous production system.

View Case Study

First Water Case Study

First Water

First Water is developing an innovative line of kayaks and canoes that convert to catamarans. Through the ANSYS Startup Program, they use engineering simulation software to optimize each boat model design within an acceptable timeframe and budget. Additionally, ANSYS tools are used to ensure that the boats meet key safety parameters and regulations.

View Case Study