Skip to Main Content

 

White Paper

TRIAC Specifications and Recommendations (Turn‐On Behavior)

TRIAC is defined as an electronic component approximately equivalent to two silicon‐ controlled rectifiers (SCRs/thyristors) joined in inverse parallel (paralleled but with the polarity reversed) and with their gates connected together. This results in a bidirectional electronic switch which can conduct current in either direction when it is triggered (turned on) and thus doesn't have any polarity. It can be triggered by either a positive or a negative voltage being applied to its gate electrode.

Once triggered, the device continues to conduct until the current through it drops below a certain threshold value, the holding current, such as at the end of a half‐cycle of alternating current (AC) main power. This makes the TRIAC a very convenient switch for AC circuits, allowing the control of very large power flows with milliampere‐scale control currents. In addition, applying a trigger pulse at a controllable point in an AC cycle allows one to control the percentage of current that flows through the TRIAC to the load (phase control).

SHARE THIS TECHNICAL PAPER

现在就开始行动吧!

如果您面临工程方面的挑战,我们的团队将随时为您提供帮助。我们拥有丰富的经验并秉持创新承诺,期待与您联系。让我们携手合作,将您的工程挑战转化为价值增长和成功的机遇。欢迎立即联系我们进行交流。