Skip to Main Content

FEM Analysis for Compaction Process of Powders

Sign up for this upcoming webinar to see press powder process analysis realized by co-simulation of Ansys Rockyand Ansys LS-DYNAand Multiscale.Sim.

Time:

Nov 15, 2022

11 AM EST / 4 PM GMT / 9:30 PM IST

Sign Up


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

About this Webinar

Manufactured materials from powder go through many processes such as granulation, mixing, compaction, and sintering. Although compaction is one of the most critical processes in determining material properties, there aren't many detailed analyses of this process. The deformation, density, and residual stress distribution of each particle are closely related to the properties of the final product. In many cases, the DEM approach performs calculations at a realistic analysis cost when handling a vast number of particles. However, it's impossible to observe changes in the heterogeneous microstructure in detail because this method treats particles as rigid bodies. Even though the DEM approach is a practical analysis method, it does not provide sufficient information to evaluate the performance of a molded product.

Therefore, we developed a workflow to conduct FEM analysis of the compaction process at a realistic computational cost by linking multiscale and DEM analysis. Real-scale analysis can be performed while explicitly taking microstructures into account. Equivalent material constants homogenize the microstructure according to the Drucker Prager constitutive law, which is obtained from virtual material testing. Multiscale.Sim achieves the linkage between micro and macro scales is an add-in tool for Ansys Workbench. This presentation will show an example of a press powder process analysis realized by co-simulation of Ansys Rocky and Ansys LS-DYNA and Multiscale.Sim.

What You Will Learn

  • Introduction to Multiscale.Sim and Ansys Rocky for the Ansys Workbench environment
  • Typical engineering and design challenges solved by combining these tools
  • General workflow for analyzing powder materials with FEM
  • How to import Ansys Rocky results into Ansys SpaceClaim for FEM

Who should attend

  •  Engineers designing and developing powder-based materials, pharmaceuticals, batteries, sintered ceramics, and so on. Especially users of Ansys Workbench, Ansys Rocky, Ansys LS-DYNA, and Multiscale.Sim.
  • Our solution not only predicts physical phenomena during the compaction process, but also visualizes problems that are unobservable in actual tests. Such data can be used for designing higher quality materials.

Speakers

Koji Yamamoto