Save Query
Load Query

Narrow Your Search

Language

Resource Type

Product Category

Product Name

Industry

Sub Industry

Show Results
1 - 10 Of 292 Results
1 2 3 4 5 30
Arrow

Engineering the Fully Electric Airplane - ANSYS Advantage - A&D 2019 - Article

All-electric aircraft are on the horizon. Engineers at magniX employ multiphysics simulation to develop powerful electric motors for propeller planes that could revolutionize the short-haul and middle-mile flight industry, making it more economical and convenient to take a 30-minute flight rather than a 2 ½-hour drive and a 1 ½-hour flight instead of an 8-hour drive.

Author: magniX Type: Article Date:
Product Name: ANSYS Mechanical, ANSYS Maxwell, ANSYS Fluent
Product Category: Electronics, Electronics - Electromechanical, Fluids, Structures, Multiphysics
Industry: Aerospace and Defense
Sub Industry: Aircraft, Aircraft OEMs and Suppliers


View

Arrow

Electrifying Solutions for Motors and Generators - ANSYS Advantage - V13 I1 - Article

The market for electric power generation equipment is growing more competitive every day, with customers demanding more reliable, eco-friendly products at lower cost. Marelli Motori meets these demands using ANSYS Maxwell, ANSYS Mechanical and ANSYS CFD in multiphysics simulations to deliver the tailor-made solutions their customers have come to rely on. More recently, they have begun using ANSYS Discovery Live to obtain instantaneous simulation results with every on-the-fly change to a product’s geometry or operating conditions, greatly reducing design time.

Author: Marelli Motori SpA Type: Article Date:
Product Name: ANSYS Mechanical, ANSYS CFD, ANSYS CFX, ANSYS Discovery Live
Product Category: Fluids, Structures, Electronics, Electronics - Electromechanical, 3D Design, Multiphysics
Industry: Energy


View

Arrow

Peak Performance for an Electric Vehicle - ANSYS Advantage - V13 I1 - Article

Developing a vehicle to compete in the Pikes Peak International Hill Climb is a test for engineers around the world. Volkswagen Motorsports engineers were determined to build a car that could compete with the best but they had less than a year to do it — and the car would be electrically powered. Using determination, ingenuity and aided by multiphysics simulation the Volkswagen team smashed the race’s all-time electric speed record.

Author: Volkswagen Type: Article Date:
Product Name: ANSYS Fluent, ANSYS Twin Builder
Product Category: Systems, Fluids
Industry: Automotive
Sub Industry: Car and Light Truck OEMs


View

Arrow

Electrification of Aircraft Propulsion - ANSYS Advantage - V13 I1 - Article

To provide aircraft suitable for short distance travel while reducing emissions, Zunum Aero is turning to electrification to create hybrid-electric systems. The challenge of developing these more electric aircraft requires the deployment of engineering simulation to achieve performance goals and to reduce the time and costs of testing.

Author: Zunum Aero Type: Article Date:
Product Name: ANSYS Mechanical, ANSYS CFD, ANSYS Fluent
Product Category: Fluids, Structures
Industry: Aerospace and Defense
Sub Industry: Aircraft, Aircraft OEMs and Suppliers


View

Arrow

Managing Large-Scale Battery Systems - ANSYS Advantage - V13 I1 - Article

Increasing electrification inevitably means more batteries, especially for mobile systems like planes, automobiles, trains and drones. These batteries are not standalone units but complex parts of a large system that must operate optimally to ensure safe and efficient energy usage. Safety and reliability are critical. Battery management systems (BMS) are essential components that leverage embedded software for real-time monitoring and control of rechargeable batteries in complex applications. To ensure that battery management systems are secure and dependable requires application of proven software tools:  ANSYS SCADE to design the embedded system, ANSYS medini analyze to verify its safety, and ANSYS Twin Builder to simulate the entire closed-loop power system to confirm that all components work together as designed.

Author: ANSYS Type: Article Date:
Product Name: ANSYS Fluent, ANSYS Twin Builder, ANSYS medini analyze, ANSYS SCADE Suite, ANSYS Mechanical
Product Category: Systems, Fluids, Multiphysics, Structures
Industry: Automotive
Sub Industry: Car and Light Truck OEMs


View

Arrow

Powering Up for the Future - ANSYS Advantage - V13 I1 - Article

Countries around the world increasingly rely on renewable energy technologies for electricity. Brazilian company WEG is a leader in design and production of electric machines including those for renewable energy which requires overcoming a wide range of engineering challenges. WEG Energy leverages the broad portfolio of ANSYS solutions across all aspects of product design, throughout the design process and even during product operation.

Author: WEG Type: Article Date:
Product Name: ANSYS Maxwell, ANSYS Mechanical, ANSYS nCode, ANSYS Workbench, ANSYS CFX, ANSYS CFD
Product Category: Electronics, Electronics - Electromechanical, Fluids, Multiphysics, Structures, Platform
Industry: Energy
Sub Industry: General Industrial Equipment, Thermal Turbomachinery, Wind Turbines


View

Arrow

Protecting Fusion Reactors from Extreme Heat - ANSYS Advantage - V13 I1 - Article

Nuclear fusion, the process that generates the sun’s heat, has the potential to generate virtually unlimited amounts of clean, safe energy on earth. Although fusion power has long been pursued, the benefits of developing a reliable system to generate this energy is well worth the effort. French Atomic Energy Commission engineers are using ANSYS software to overcome the difficult challenges involved in protecting fusion reactor components from operating temperatures of about 150 million degrees. ANSYS electromagnetic and structural simulations are leveraged to design components to withstand enormous thermal loads; ANSYS fluid dynamics software is applied to cooling system design; and optical simulation is used to calibrate infrared temperature measurement systems so that engineers can accurately distinguish bright spots caused by direct heat flux from heat flux merely caused by reflections.

Author: French Alternative Energies and Atomic Energy Commission (CEA) Type: Article Date:
Product Name: ANSYS CFD, ANSYS Fluent, Speos, ANSYS HFSS, ANSYS Mechanical
Product Category: Fluids, Electronics, Optical, Electronics - High Frequency Electromagnetics, Structures
Industry: Energy


View

Arrow

Aiming High - Article - ANSYS Advantage - V12 I2

Microsatellites represent a new opportunity to provide connectivity for the Internet of Things, as well as capture images and data from space, at a relatively low cost — but the challenge is getting them into orbit in a timely and cost-effective manner. By making satellite launches both routine and affordable, startup Vector is opening up the “space race” to a new generation of small and midsized businesses that can deploy entire swarms of tiny satellites. With its risk-taking engineering strategy, Vector is poised to disrupt the satellite industry, one launch at a time.

Author: Vector Type: Article Date:
Product Category: Structures, Fluids
Industry: Aerospace and Defense, High Tech
Sub Industry: Space


View

Arrow

Cool Idea for Engine Design - Article - ANSYS Advantage - V12 I2

Achates Power has developed a radically improved two-stroke opposed-piston internal combustion engine that increases fuel efficiency and reduces greenhouse gas emissions. ANSYS simulation tools help the company to shorten design iteration time, minimize hardware prototypes and reduce the development time of new engines by approximately one year.

Author: Achates Power Inc. Type: Article Date:
Product Name: ANSYS Mechanical, ANSYS Workbench, ANSYS CFD
Product Category: Multiphysics, Fluids, Structures, Platform
Industry: Automotive


View

Arrow

Targeting a Tumor - Article - ANSYS Advantage - V12 I2

By devising a new computational method that tracks the flow of therapeutic drug particles in an aerosol from the lips to the lungs, researchers can deposit a drug on a targeted lung tumor with 90 percent efficiency. This is a major improvement over the 20 percent efficiency of conventional aerosol treatment methods. One key to the success of this new computational method is the development of a human digital twin that can be made patient-specific using the real geometry of the patient’s lungs..

Author: School of Chemical Engineering, Oklahoma State University Type: Article Date:
Product Name: ANSYS CFD, ANSYS ACT
Product Category: Fluids, Platform
Industry: Healthcare - BioMed, High Tech
Sub Industry: Respiratory, Diagnosis and Personalized Medicine


View

1 - 10 Of 292 Results
1 2 3 4 5 30
 
Contact