Skip to Main Content

 

Case Study

Ansys Simulation Helps XTPL Develop a Precise 3D Model of the Nanomaterial Printing Process


"We use Ansys solutions to simulate the XTPL process of ultra-precise printing of nanomaterials. Specifically, we use Ansys Fluent, obtained through the Ansys Startup Program, for fluid dynamics simulations. We have developed a complete three-dimensional model of the XTPL process, which allows us to optimize printing and material parameters, as well as the geometry of the printing nozzle. Therefore, we can significantly speed up the R&D process thanks to Ansys solutions."

— Dr. Piotr Kowalczewski, R&D Team Manager / Numerical Simulation


Introduction

XTPL solutions of nanoprinting may be applied mostly in printed electronics. Our focus at the moment is the display market, which currently faces some challenges: progressive complexity of displays occurring with reducing feature size; constant miniaturization causing yield issues; expensive, complex and limited yield improvement (repair) methods; and the need for mechanical flexibility or electrical field damage risk assessment, to name just a few challenges. XTPL plans to support manufacturers in overcoming these issues.

Challenges

XTPL’s key objective is to develop and implement tailor-made solutions in terms of nanoprinting and ultraprecise deposition for several sectors, mainly within printed electronics. The main competitive advantage of the XTPL additive solution is unprecedented precision — one that cannot be replicated by any other printing method. To improve this method, we were looking for simulation software that would help us to relatively easily develop a precise 3D model of the XTPL process.

Engineering Solution

We have developed a full 3D model of the XTPL process. The model allows us to easily optimize the printing and material parameters, as well as the geometry of the printing nozzle. During the optimization of the material and process parameters, running simulations in batch mode (either using Ansys Workbench or Ansys Fluent scripts) turned out to be extremely valuable.

Moreover, we use Ansys SpaceClaim scripts to efficiently generate a number of geometries in the batch mode (Workbench). This approach significantly speeds up our R&D process.

Benefits

Using Ansys solutions, which is the industry standard, the time required for model development is significantly shorter than in the case of opensource software. We are able to more quickly optimize the printing process, the nozzle geometry and material parameters, and therefore develop the XTPL technology and adjust its capabilities to a particular client’s requirements in less time.

查看 Ansys 的服務與產品

立即聯絡我們

* = 必填欄位

感謝您聯絡我們!

我們將在此解答您的問題,並期待與您交流互動。Ansys 的銷售團隊成員會立即與您聯絡。

Footer Image