Skip to Main Content

Date: 10/05/2018

Case Study

Andar Technologies Uses Ansys HFSS to Optimize Millimeter-Wave Radar Systems for Autonomous Vehicles

We mainly use Ansys HFSS for electromagnetic full wave simulation and circuit design analysis. The Ansys solution allows us to achieve fast and highly accurate results of physical models/components used in our mm-wave IC system. Moreover, Ansys provides solutions for many issues involving radar systems on a chip that are not fully available from other competitors.”

- Hoang Le, Designer / Andar Technologies


Millimeter-wave (mm-wave) radar systems for automotive applications will be crucial to the success of autonomous vehicles by aiding in the detection and localization of pedestrians, vehicles changing lanes, and parking and braking events in complex traffic scenarios. The successful development of mm-wave radar systems requires a highly accurate, full-wave electromagnetic simulation tool to accurately model all system components, from inside the IC to the PCB and antennas.


Problems in any part in the mm-wave radar system can ruin the functionality of the whole system, potentially costing hundreds of thousands of dollars and months of delays. Several sensors are needed to cover all short-range to long-range tasks, adding costs in a low-margin industry. Andar Technologies’ mission is to develop low-cost automotive mm-wave radar on chips exclusively for 79 Ghz — offering a more compact chip and antenna.

Engineering Solution

For efficient overall workflow, ALinks interacts with the ECAD System for fast design transfer. Parasitics modeling is very important and can be easily achieved by either adding RLC Components directly to the 3D electromagnetic (EM) model or adding lumped components to the exported EM model inside the circuit environment of Ansys Electronics Desktop. Once the complete circuit models deliver desired results for parameters, such as Q factor, inductance and gain, we combine all components into a system simulation using the Ansys RF option.


Design and development of an mm-wave system cannot be competitive without accurate simulations. Simulation provides performance insights like antenna patterns, matching characteristics and loss figures early in the design cycle, allowing for a fast turnaround in optimization.

In a competitive industry, testing, prototyping and manufacturing costs need to be as low as possible. Virtual prototypes from Ansys HFSS allow Andar to create innovative designs and reduce the amount of physical prototyping to a minimum. Andar estimates that simulation has saved hundreds of thousands of dollars for fabrication runs and has eliminated years from time-to-market metrics.

See What Ansys Can Do For You

Contact us today

* = Required Field

Thank you for reaching out!

We’re here to answer your questions and look forward to speaking with you. A member of our Ansys sales team will contact you shortly.

Footer Image