“The Speos model is easily scalable and the design can be reused in other areas such as indicators. It can easily be adopted into new projects and designs with small tweaks, saving an estimated 80% development and validation time for each future project.”
— Joel Hake. Concept Engineer / China Euro Vehicle Technology (CEVT), Sweden
China Euro Vehicle Technology (CEVT) is an innovation company focused on key automotive areas, including exterior lighting. Optical engineers at CEVT rely on Ansys’ physics-based simulations to meet and exceed design challenges. The resulting technology solutions are used to test innovative concepts in new car models and in discussions with expert suppliers. Simulation speeds up innovation and validation to push boundaries for what is possible both in-house and in supplier relationships.
Exterior lighting is a critical security function of any car and must follow strict legal regulations to guarantee road illumination and safety. In addition to meeting ECE international regulations, exterior lighting design teams also need to consider several other factors, sometimes competing, when creating new systems. Slim, elegant lights are in high demand for the styling and brand attribute they give to a vehicle, but reducing size must be balanced with keeping the time and costs of design and manufacturing down. Combining all these demands is challenging but also inspiring for the engineers at CEVT.
CEVT engineers used Speos to build, iterate and validate a very small reflector — only 8 mm high and 32 mm deep with a light output opening of only 5 mm high — for a brake light. Using optical simulation enabled them to test many options and fine-tune the design in low resolution before final validation and manufacturing of the prototype.
The initial model contained only three reflectors that were combined and tested to ensure that the light came out through the opening in a controlled and homogeneous way. This small prototype was then made scalable by locking the ends of the reflectors in a master-slave relationship. This enabled the engineers to change one factor in the model without having to redo the ends, thus making it of scalable length. Only then was the rest of the reflector built and adjustments made to angles of individual reflector mirrors to ensure legal intensity demands. They also simulated how the light projected outside the car and what it looked like to other cars behind or passing it.
Nous sommes à votre disposition pour répondre à toutes vos questions. Un membre de l'équipe commerciale Ansys vous contactera sous peu.