Reliability of Microvias/Plated Through-Holes in PCB

webinar-thumbnail

Due to the higher I/O density and smaller electronic packages, the demand for high-density interconnects (HDIs) has increased significantly. Microvias are essential elements in HDI printed circuit boards (PCBs). Failure of these structures is the most common cause of open circuits in PCBs. This has created great concern for the reliability of microvias within the electronics industry.

This webinar briefly discusses common failure mechanisms in microvias and plated through-holes, and highlights their differences. It also identifies common manufacturing defects and how they influence the reliability of these structures.

The presentation addresses the challenges and pitfalls associated with the modeling of these devices using the finite element method (FEM), as well as the importance of statistical analysis on fatigue life prediction of plated through-holes (PTHs).

Finally, the webinar provides a new, fully automated approach to analyze complex PCB designs and identify the configurations that are susceptible to failure.

分享:

我願意收到來自Ansys及其合作夥伴的最新訊息和其他通知。我可以隨時取消訂閱。 Ansys隱私聲明

點擊此處按鈕和ANSYS進行對話

聯繫我們