ANSYS2020_Innovation_Conference_Keynote_企業研發流程數位智能化、CAE開啟虛實整合迎向數位生產 Ansys 台灣 總經理 李祥宇 台達電子 企業策略業務發展和聯盟部 處長 張立業 Digitimes 副總經理 黃逸平
One of the biggest challenges in predicting fatigue failure is characterizing the load over the lifetime of a part. Using simulation solutions, like ANSYS Mechanical and ANSYS nCode DesignLife, engineers can run numerous load and design variations to ensure their products meet fatigue specifications and will continue to perform beyond the warranty period. Better yet, they can perform simulations and optimizations before building the product. In this way, engineers can make improvements early in the development cycle and utilize optimization algorithms to further streamline the design process. In this webinar, participants will learn the difference between material fatigue and high- and low-cycle fatigue failure, plus how to account for fatigue in design using simulation.
Say goodbye to complicated user-defined functions (UDF) and hello to expressions. With no deep knowledge of programming, you can easily enter an expression, either directly in the field where it will be applied or as a named expression that can be reused at multiple locations. Attend this webinar to learn how to simplify the specification of complex boundary and cell zone conditions with a wide range of powerful expressions, including: Positional variables Field variables Solution variables Reduction operations
Learn about the new look, features and enhancements that will improve your Ansys Fluent user experience. Start right from the Fluent launcher to choose your starting mode and access recent files and parallel processing for meshing and solving. This webinar will cover the new appearance of the software interface, graphics, display colors and shortcuts; productivity tips within the text user interface; drag and drop features and other behavior changes.
In this webinar, learn more about Ansys SpaceClaim updates that support concept modeling and model prep for simulation, including: block recording and bidirectional CAD interfaces to allow replay of modeling operations on modified CAD geometry; constraint-based sketching that makes it easier to create complex sketches for 3D design; and autoskinning of topology optimization results from Ansys Mechanical for automated geometry reconstruction.
Ansys 2020 R1 empowers Ansys Mechanical users to go further than ever before with enhancements to improve the handling of complex, highly nonlinear and massively large models. Sign up to learn more about the enhancements in Ansys 2020 R1!
Ansys Fluent has been enhanced to organize the process for running simulations with a task-based workflow that guides you through the simulation process, reduces the options to only those that are relevant at each point in the process and provides best practices as defaults. This workflow presents you with the right choices to lead you to an accurate solution, making it possible to develop a better product in less time. Read this white paper to see how the new workflow can be can be utilized to reduce the time and software skill required to mesh watertight CAD geometry.
ANSYS 2020 Innovation Conference TEAAC (Totally Enclosed Air-To-Air Cooled)馬達熱流分析. 東元電機 綜合研究所 主任 賴逢祥 博士
How Simulation Tools Change My Thermofluids Research
ANSYS Mechanical在連接器產業的應用
工業永磁馬達應用與分析重點
系統角度看馬達設計
Ansys 應用於伺服器產業之結構評估
離岸風機發展的工程挑戰與NTUT – OWPAS開發進程
Sherlock對於車用電子的隨機振動疲勞評估與改善
Scoring Vectors for IR Sign-off Using Power-Weighted Coverage Metrics
800Gbps Cable Assembly Design
共用電源時的雜訊干擾分析
High speed IO buffer modeling solution
