Course Image

ANSYS Mechanical Workbench Additive

Overview

This course is designed to provide knowledge about the 3D print process simulation.

It will give you a general overview of the challenges when simulating a print process. Once you have obtained the optimized shape from ANSYS Mechanical using Topology Optimization tools, you’ll be able to simulate the manufacturing process. It requires you to consider  the orientation of the part in the printer, the materials to be used and the design of the support structure. This is what you will learn in this course.

This course teaches you how to use the Additive Wizard in Mechanical to define all the necessary information for your simulation. There is also a part of the course using SpaceClaim for creation of the support structure.

Prerequisites

A technical education and a background in the fundamentals of finite element analysis are recommended.

The completion of the following courses is strongly advised:

  • ANSYS Mechanical Getting Started – Part 1

  • ANSYS Mechanical Getting Started – Part 2

  • Introduction to ANSYS SpaceClaim for FEA users

Target Audience: Engineers and Designers

Teaching Method: Lectures and computer practical sessions to validate acquired knowledge. A training certificate is provided to all attendees who complete the course.

 

Agenda SUBSCRIBE TODAY  

Topics Covered :

  • Challenges of simulating 3D print process

  • Lumped layer approach

  • Material information to consider

  • Construction guidelines for Additive Manufacturing

  • Thermal Structural analysis weak coupling

  • Setting up a 3D print process simulation using the Additive Wizard

  • Results tracking

  • Supports definition

  • APDL commands behind the 3D print process simulation

Agenda :

This is a 1 day classroom course covering both lectures and workshops.  For virtual training, this course is covered over 2 X 2 hour sessions, lectures only

  • Live Classroom Day 1
    • Module 01: General Information on 3D Print Process Simulation

    • Module 02: Remarks on Construction Guidelines for AM

    • Module 03: Setting up a 3D Print Process Simulation

    • Workshop 03.1: Setting up 3D Print Process Simulation

    • Workshop 03.2: Supports Definition

    • Module 04: What’s Behind the Print Process Simulation

  •  Virtual Classroom Session 1
    • Module 01: General Information on 3D Print Process Simulation

    • Module 02: Remarks on Construction Guidelines for AM

  • Virtual Classroom Session 2
    • Module 03: Setting up a 3D Print Process Simulation

    • Workshop 03.1: Setting up 3D Print Process Simulation

    • Workshop 03.2: Supports Definition

    • Module 04: What’s Behind the Print Process Simulation

Filter By Country :
Date/Time Duration Event Type Location Language Cost
February 19, 2019
11:00 - 13:00   EST (GMT -5)
February 19, 2019 2 Sessions
Feb 19-20
Virtual Virtual - WebEx English Subscription Only REGISTER  ›

click below to start a conversation with ANSYS

Contact Us
Contact Us
Contact