ANSYS Logo
 
 
Course Image

ANSYS Explicit Dynamics

Overview

This course will enable you to develop the basic skills necessary to implement complete Explicit Dynamics solution procedures in ANSYS Mechanical. Efficiently simulate the dynamic response of highly transient, highly nonlinear physical phenomena like drop testing and high-speed impact. You’ll utilize the extensive library of nonlinear material models and body-to-body contact to produce faithful representations of real-world physical systems.

Prerequisites

Completion of ANSYS Mechanical Getting Started – Parts 1 and 2 or Introduction to ANSYS Mechanical is required.

A technical education and a background in the fundamentals of finite element analysis are recommended. A basic background in the following areas is also recommended: dynamics, mechanics of materials, material modeling, and the physics of transient dynamic events. An engineering degree is not required.

Target Audience: Engineers and Designers

Teaching Method:Lectures and computer practical sessions to validate acquired knowledge.  A training certificate is provided to all attendees who complete the course.

Pathway Explicit Dynamics

 

Agenda SUBSCRIBE TODAY  

Topics Covered :

  • Explicit Dynamics Setup and Workflow

  • Drop Test Wizard

  • Introduction to Explicit

  • Preprocessing

  • Element Formulations

  • Meshing

  • Material Models

  • Connections (Body Interactions, Contact, Spot Welds, Springs/Dampers, Joints)

  • Analysis Settings and Parameters

Agenda :

This course is a 2 day classroom covering both lectures and workshops. For virtual training, this course is covered over 3 x 2 hour sessions, lectures only.

  • Virtual Classroom Session 1 / Live Classroom Day 1

    • Module 01: Explicit Dynamics Setup and Workflow

    • Workshop 01.1: Cylinder Impact

    • Workshop 01.2: Can Crush

    • Workshop 01.3: Drop Test Wizard Circuit Board

    • Module 02: Introduction to Explicit Dynamics

    • Workshop 02.1: Impact of a Projectile on a Prestressed Container

    • Workshop 02.2: Drop Test of a Pressurized Gas Bottle

  • Virtual Classroom Session 2 / Live Classroom Day 1

    • Module 03: Meshing

    • Workshop 03.1: Mesh Study

    • Workshop 03.2: 2D Axisymmetric Impact

  • Virtual Classroom Session 2 / Live Classroom Day 2

    • Module 04: Material Models

    • Workshop 04.1: 1D Shock Propagation

    • Workshop 04.2: Turbine Blade Failure

  • Virtual Classroom Session 4 / Live Classroom Day 2

    • Module 05: Connections

    • Workshop 05.1: Oblique Impact

    • Workshop 05.2: Drop Test on Reinforced Concrete

    • Workshop 05.3: KEP Impact on Reinforced Concrete

    • Module 06: Analysis Settings and Parameters

    • Workshop 06.1: Can Crush with Mass Scaling

    • Workshop 06.2: Drop Test of a Bottle

    • Workshop 06.3: Prestressed Beam with Static Damping

    • Workshop 06.4: Cylinder Impact What-if Study

    • Workshop 06.5: Filled Can Crush

Filter By Country :
Date/Time Duration Event Type Location Language Cost
January 14, 2019
13:00 - 15:00   EST (GMT -5) 		January 14, 2019 3 sessions
Jan 14-16 		Virtual Virtual - WebEx English Subscription Only REGISTER  ›

click below to start a conversation with ANSYS

Contact Us
Contact Us
Contact