Course Image

ANSYS Fluent Getting Started (Classic Workflow)

Overview

This course teaches the essential skills you will need to start performing basic computational fluid dynamics (CFD) simulations on your own using ANSYS Fluent software. Instructor demos and hands-on workshops cover every aspect of the end-to-end CFD workflow, including working with CAD models in ANSYS SpaceClaim, creating quality CFD meshes with ANSYS Meshing, and all aspects of performing CFD simulations in ANSYS Fluent . Course Modules 01 through 05 are organized into geometry (ANSYS SpaceClaim), meshing (ANSYS Meshing) and solver (ANSYS Fluent) topics, and for each of these three topics students go through the complete end-to-end workflow of a different CFD problem.


Learning Outcome

  • Understand the end-to-end procedure of simple CFD problems using ANSYS Fluent 

  • Learn how to use the most important functions of  ANSYS SpaceClaim Direct Modeler

  • Learn how to  create high quality CFD meshes with ANSYS Meshing 

  • Become familiar with the end-to-end workflow of simple CFD problems using ANSYS Fluent

 

Prerequisites

  • A technical education and background in fluid mechanics and heat transfer is recommended but not mandatory. An engineering degree is not required.

Target Audience: Fluids Engineers, Combustion Engineers, Thermal Engineers and Aerodynamics Engineers

Teaching Method: Lectures and computer practical sessions to validate acquired knowledge. A major emphasis is placed on teaching by software demonstration and on the development of a solution to a design challenge from start to finish.

Learning Options: Training materials for this course are available with a ANSYS Learning Hub Subscription. If there is no active public schedule available, private training can be arranged. Please contact us.

ANSYS Fluent Getting Started Classic 

 

Agenda SUBSCRIBE TODAY  

Agenda :

This is a 3 day classroom course covering both lectures and Demos. For virtual training, this course is covered over 5 x 2 hour sessions lectures and demos only.

 

  • Virtual Classroom Session 1 / Live Classroom Day 1 

    • Module 1: Overview of CFD

    • Lecture 1.0: Introduction to ANSYS 

    • Lecture 1.1: Introduction to ANSYS Workbench 

    • Lecture 1.2: Overview of CFD Process

    • Demo 1: Flow in a Mixing Tee

    • Workshop 1: Flow in a Mixing Tee 

    • Module 2: ANSYS Fluid Simulation Basics

    • Lecture 2.1: ANSYS SpaceClaim Essentials

    • Demo 2.1: Flow Distribution in an Air Manifold (SCDM)

    • Lecture 2.2:  ANSYS Meshing Essentials

    • Demo 2.2: Flow Distribution in an Air Manifold (Meshing)

    • Lecture 2.3 : Fluent User Interface and Workflow 

    • Demo 2.3: Flow Distribution in an Air Manifold (CFD)

    • Workshop 2: Flow Distribution in an Air Manifold 



  • Virtual Classroom Session 2 / Live Classroom Day 1 

    • Module 3: Defining Fluid Simulations

    • Lecture 3.1: Basic Operations in Ansys SpaceClaim  

    • Demo 3.1: Mixing Hot and Cold Streams in a Mixing Elbow (SCDM)

    • Lecture 3.2: Global Mesh Control

    • Demo 3.2: Mixing Hot and Cold Streams in a Mixing Elbow (Meshing)

    • Lecture 3.3: Setting Up Physics

    • Demo 3.3: Mixing Hot and Cold Streams in a Mixing Elbow (CFD)

    • Workshop 3: Mixing Hot and Cold Streams in a Mixing Elbow


  • Virtual Classroom Session 3 / Live Classroom Day 2

    • Module 4: Postprocessing Fluid Simulations

    • Lecture 4.1: Geometry Handling and Repair

    • Demo 4.1: Tube Bundle (SCDM)

    • Lecture 4.2: Local Mesh Controls

    • Demo 4.2: Tube Bundle (Meshing)

    • Lecture 4.3: Results

    • Demo 4.3: Tube Bundle Post-processing 

    • Workshop 4: Tube Bundle


  • Virtual Classroom Session 4 / Live Classroom Day 2

    • Module 5:  Parameters and Design Points 

    • Lecture 5.1: Main Tools, Parameters and Assemblies

    • Demo 5.1: Ball Valve (SCDM)

    • Lecture 5.2: Mesh Methods and Selective Meshing

    • Demo 5.2: Ball Valve (Meshing)

    • Lecture 5.3: Parameters and Design Points

    • Demo 5.3: Parametric Study in a Ball Valve (CFD)

    • Workshop 5: Parametric Study in a Ball Valve

    • Module 6:Solving

    • Lecture 6: Solving

    • Workshop 6: Solving


  • Virtual Classroom Session 5 / Live Classroom Day 3

    • Module 7: Lecture 7: CFD Best Practices

    • Workshop 7: Airfoil

    • Module 8: Lecture 8: Turbulence

    • Workshop 8: Flow Over a Backward Facing Step 

    • Module 9: Lecture 9: Heat Transfer

    • Workshop 9: Electronics Cooling  

    • Module 10: Lecture 10: Transient Flows

    • Workshop 10: Vortex Shedding

Filter By Country :
Date/Time Duration Event Type Location Language Class Cost
November 18, 2019
08:30 - 17:00   EST (GMT -5)
November 18, 2019 3 Days
Nov 18-20
Live Bloomington , Minnesota , United States English Subscription Only Register  ›
December 3, 2019
09:00 - 17:00   CST (GMT -6)
December 3, 2019 3 Days
Dec 3-5
Live Houston , Texas , United States English Subscription Only Register  ›
November 27, 2019
10:00 - 17:00   KST (GMT +9)
November 27, 2019 3 Days
Nov 27-29
Live Seoul , South Korea Korean 1050000   KRW Register  ›
December 3, 2019
08:30 - 17:00   EST (GMT -5)
December 3, 2019 3 Days
Dec 3-5
Live Middlebury , Connecticut , United States English Subscription Only Register  ›
December 10, 2019
08:30 - 17:00   PST (GMT -8)
December 10, 2019 3 Days
Dec 10-12
Live San Jose , California , United States English Subscription Only Register  ›

click below to start a conversation with ANSYS

Contact Us
Contact Us
Contact