Course Image

ANSYS CFX Multiphase Flow Modeling

Overview

Multiphase flows often play a key role in industrial processes and understanding multiphase phenomena can be important for optimizing processes or products.  ANSYS CFX offers a range of models for multiphase flow simulation which can help you to understand multiphase flow phenomena in your application.

This course combines multiphase flow theory with practical work using workshops.  After the course, attendees are able to identify and use the correct model for their multiphase flow application.

Prerequisites

  • A technical education and background in fluid mechanics and heat transfer is recommended but not mandatory. An engineering degree is not required.
  • Completion of the ANSYS CFX Getting Started course is required.

Target Audience: Engineers and Designers

Teaching Method: Lectures and computer practical sessions to validate acquired knowledge. A training certificate is provided to all attendees who complete the course.

ansys-cfx-multiphase-flow-modeling

 

Agenda SUBSCRIBE TODAY  

Agenda :

  • This is a 2 day classroom course covering both lectures and workshops. For virtual training, this course is covered over 5 x 2 hour sessions, lectures only.

  • Virtual Classroom Session 1 / Live Classroom Day 1

    • Module 00 – Introduction to ANSYS

    • Module 01 – Introduction to Multiphase Flows

    • Module 02 – Modeling Approaches

    • Workshop WS01 – Bubbly Flow in a Rectangular Bubble Column

    • Module 03 – Interphase Momentum & Heat Transfer

    • Workshop WS02 – Including Non-Drag Forces in Bubbly Flow

  • Virtual Classroom Session 2 / Live Classroom Day 1

    • Module 04a – Interphase Mass Transfer (Part 1)

    • Workshop WS03 – RPI Wall Boiling and Thermal Phase Change

    • Module 04b – Interphase Mass Transfer (Part 2)

    • Workshop WS04 – Cavitation for Flow Over a Hydrofoil

  • Virtual Classroom Session 3 / Live Classroom Day 2

    • Module 05 – Free Surface Flows

    • Module 06 – Population Balance Methods

    • Workshop WS05 –  Free Surface Flow Tank Flush or

    • Workshop WS08 –  MUSIG and Non-Drag Forces

  • Virtual Classroom Session 4 / Live Classroom Day 2

    • Module 07 – Lagrangian Particle Tracking

    • Workshop WS06 – Lagrangian and Algebraic Slip Approaches

    • Module 08 – Advanced Lagrangian Particle Tracking

    • Workshop WS07 – Lagrangian Approach for an Evaporating Droplet

  • Virtual Classroom Session 5 / Live Classroom Day 2

    • Module 09 – Phase Change in Multicomponent Multiphase Flows

    • Module 10 – Tips and Tricks in Multiphase Flows

    • Workshop WS09 – Modelling a Steam Line Break with the IAPWS EOS or

    • Workshop WS10 – Multicomponent Multiphase Phase Change

Filter By Country :
Date/Time Duration Event Type Location Language Cost
February 4, 2019
10:30 - 12:30   CET (GMT +1)
February 4, 2019 5 sessions
Feb 04-08
Virtual Virtual - WebEx English Subscription Only REGISTER  ›

click below to start a conversation with ANSYS

Contact Us
Contact Us
Contact