ANSYS Logo
 
 
Course Image

ANSYS CFX Getting Started (Also Available as Self-Paced Learning)

Overview

This course teaches the essential skills you will need to start performing basic computational fluid dynamics (CFD) simulations on your own using ANSYS CFX software. Instructor demos and hands-on workshops cover every aspect of the end-to-end CFD workflow, including working with CAD models in ANSYS SpaceClaim, creating quality CFD meshes with ANSYS Meshing, and all aspects of performing CFD simulations in ANSYS CFX. Course Modules 01 through 06 are organized into geometry (ANSYS SpaceClaim), meshing (ANSYS Meshing) and solver (ANSYS CFX) topics, and for each of these three topics students go through the complete end-to-end workflow of a different CFD problem.

Learning Outcome

  • Understand the end-to-end procedure of simple CFD problems using ANSYS CFX

  • Learn how to use the most important functions of  ANSYS SpaceClaim Direct Modeler

  • Learn how to  create high quality CFD meshes with ANSYS Meshing

  • Become familiar with the end-to-end workflow of simple CFD problems using ANSYS CFX

 

Prerequisites

  • A technical education and background in fluid mechanics and heat transfer is recommended but not mandatory.  An engineering degree is not required.

Target Audience: Fluids Engineers, Combustion Engineers, Thermal Engineers and Aerodynamics Engineers

Teaching Method: Lectures and computer practical sessions to validate acquired knowledge. A major emphasis is placed on teaching by software demonstration and on the development of a solution to a design challenge from start to finish. 

Self-paced Learning: Complete a class on your own schedule at your own pace. Scope is equivalent to Instructor led classes. Includes video lecture, workshops and input files. All our Self-Paced video courses are only available with an ANSYS Learning Hub subscription. Register for a subscription using the tab below or contact training@ansys.com for more information.

Learning Options: Training materials for this course are available with a ANSYS Learning Hub Subscription. If there is no active public schedule available, private training can be arranged. Please contact us.

ANSYS Fluent Getting Started 

 

Agenda SUBSCRIBE TODAY  

Agenda :

This is a 3 day classroom course covering both lectures and workshops. For virtual training, this course is covered over 5 x 2 hour sessions, lectures only.

Virtual Classroom Session 1 / Live Classroom Day 1

  • Module 1: Overview of CFD
  • Lecture 1.0: Introduction to ANSYS
  • Lecture 1.1: Introduction to ANSYS Workbench
  • Lecture 1.2: Overview of CFD Process
  • Demo 1: Flow in a Mixing Tee
  • Workshop 1: Flow in a Mixing Tee
  • Module 2: Ansys Fluid Simulation Basics
  • Lecture 2.1: ANSYS SpaceClaim Essentials
  • Lecture 2.2:  Ansys meshing Essentials
  • Lecture 2.3 : CFX User Interface and Workflow
  • Demo 2: Flow Distribution in an Air Manifold
  • Workshop 2: Flow Distribution in an Air Manifold

Virtual Classroom Session 2 / Live Classroom Day 1

  • Module 3: Defining Fluid Simulations
  • Lecture 3.1: Basic Operations in Ansys SpaceClaim
  • Demo 3.1: Mixing Hot and Cold Streams in a Mixing Elbow (SCDM)
  • Lecture 3.2: Global Mesh Control
  • Demo 3.2: Mixing Hot and Cold Streams in a Mixing Elbow (Meshing)
  • Lecture 3.3: Setting Up Physics
  • Demo 3.3: Mixing Hot and Cold Streams in a Mixing Elbow (CFX)
  • Workshop 3: Mixing Hot and Cold Streams in a Mixing Elbow

Virtual Classroom Session 3 / Live Classroom Day 2

  • Module 4: Postprocessing Fluid Simulations
  • Lecture 4.1: Geometry Handling and Repair
  • Demo 4.1: Tube Bundle (SCDM)
  • Lecture 4.2: Local Mesh Controls
  • Demo 4.2: Tube Bundle (Meshing)
  • Lecture 4.3: Postprocessing
  • Demo 4.3: Tube Bundle Post processing with CFD-Post (CFX)
  • Workshop 4: Tube Bundle

Virtual Classroom Session 4 / Live Classroom Day 2

  • Module 5:  Parameters and Design Point
  • Lecture 5.1: Main Tools, Parameters and Assemblies
  • Demo 5.1: Ball Valve (SCDM)
  • Lecture 5.2: Mesh Methods and Selective Meshing
  • Demo 5.2: Ball Valve (Meshing)
  • Lecture 5.3: Parameters and Design Points
  • Demo 5.3: Parametric Study in a Ball Valve (CFX)
  • Workshop 5: Parametric Study in a Ball Valve
  • Module 6:Solving
  • Lecture 6: Solving
  • Demo 6 : Solving (Mixing Elbow and Manifold cases)
  • Workshop 6: Solving (Mixing Elbow and Manifold cases)

Virtual Classroom Session 5 / Live Classroom Day 3

  • Module 7: CFD Best Practices
  • Lecture 7: CFD Best Practice
  • Workshop 7: Airfoil
  • Module 8: Heat Transfer
  • Lecture 8: Heat Transfer
  • Workshop 8: Electronics Cooling 
  • Module 9: Transient Flows
  • Lecture 9: Transient Flows
  • Workshop 9: Vortex Shedding
Filter By Country :
Date/Time Duration Event Type Location Language Class Cost
January 28, 2020
9:00 AM - 17:00 PM   CET (GMT +1) 		January 28, 2020 3 Days
Jan 28-30 		Live Darmstadt , Germany German 1710   EUR
Buy Class  › Subscriber Login  ›
February 25, 2020
9:30 - 18:00   IST (GMT +5:30) 		February 25, 2020 3 Days
Feb 25-27 		Live Noida , India English 43470   INR
Buy Class  › Subscriber Login  ›
April 20, 2020
9:30 - 18:00   IST (GMT +5:30) 		April 20, 2020 3 Days
Apr 20-22 		Live Pune , India English 43470   INR
Buy Class  › Subscriber Login  ›
June 8, 2020
9:30 - 18:00   IST (GMT +5:30) 		June 8, 2020 3 Days
Jun 8-10 		Live Bengaluru , India English 43470   INR
Buy Class  › Subscriber Login  ›
February 19, 2020
10:00 - 17:00   KST (GMT +9) 		February 19, 2020 3 Days
Feb 19-21 		Live Seoul , South Korea Korean 1050000   KRW Register  ›
April 21, 2020
9:15 - 17:00   BST (GMT +1) 		April 21, 2020 3 Days
Apr 21-23 		Live Abingdon , England , United Kingdom English 1320   GBP
Buy Class  › Subscriber Login  ›

click below to start a conversation with ANSYS

Contact Us
Contact Us
Contact