Electronics Simulation Products

ANSYS HFSS Getting Started

Overview

The HFSS Getting Started course introduces the ANSYS Electronic Desktop and familiarizes brand new HFSS users with the graphical user interface (GUI) and all of the steps in the HFSS workflow: geometry construction, boundaries and simulation space, wave and lumped ports, solution setup, frequency sweep, and post processing.  The course is hands-on, with about 60% of the time dedicated to simulation workshops and 40% dedicated to learning content and question and answer.  The HFSS Getting Started course also introduces high performance computing and parameterized sweeps and optimization in the HFSS Optimetrics package.  The focus of the course is RF and microwave, including filter, microstrip and waveguide structures.  Post processing focuses on S-parameter plots and field overlays on geometry.

Prerequisites

  • A technical education and/or background in high frequency electromagnetics is recommended but having an engineering degree is not required.
  • Familiarity with transmission lines, waveguides, and scattering parameters (S-parameters)

ANSYS HFSS Getting Started

Target Audience: Engineers and Designers

Teaching Method: Lectures and computer practical sessions to validate acquired knowledge.

Agenda SUBSCRIBE TODAY  

Topics Covered :

Agenda :

This is a 1 day classroom course covering both tutorials and workshops. For virtual training, this course is covered over 3 x 2 hour sessions, combining lectures, some workshop demonstrations, and question and answer discussions.

  • Live Classroom Day 1
    • Introduction to ANSYS and the ANSYS Electronic Desktop (AEDT)
    • Introduction to HFSS FEM (finite element method)
    • Workshop: Coaxially-fed band pass filter
    • Boundaries and Simulation Space
    • Workshop: Patch antenna open region boundary
    • Solution Setup Workshop: SMA-Microstrip stub simulation
    • Post Processing
    • Workshop: Patch antenna S-parameters and fields
    • Parameterized Geometry Construction
    • Workshop: Microstrip bend geometry
    • Lumped and Wave Ports
    • Workshop: Microstrip bend ports
    • HPC (High Performance Computing) and Optimetrics
    • Workshop: Parameter Sweep
Filter By Country :
Date/Time Duration Event Type Location Language Cost
January 21, 2019
10:30 - 12:30   CET (GMT +1)
January 21, 2019 3 sessions
Jan 21-23
Virtual Virtual - WebEx English Subscription Only REGISTER  ›
February 19, 2019
16:00 - 18:00   EST (GMT -5)
February 19, 2019 3 sessions
Feb 19-21
Virtual Virtual - WebEx English Subscription Only REGISTER  ›
March 13, 2019
08:30 - 17:00   EST (GMT -5)
March 13, 2019 1 day
Mar 13
Live Ann Arbor , Michigan , United States English Subscription Only REGISTER  ›
March 12, 2019
08:30 - 17:00   CST (GMT -6)
March 12, 2019 1 day
Mar 12
Live Bloomington , Minnesota , United States English Subscription Only REGISTER  ›
March 6, 2019
08:30 - 17:00   EST (GMT -5)
March 6, 2019 1 day
Mar 6
Live Concord , Massachusetts , United States English Subscription Only REGISTER  ›
March 7, 2019
09:00 - 17:00   PST (GMT -8)
March 7, 2019 1 day
Mar 7
Live Irvine , California , United States English Subscription Only REGISTER  ›
January 30, 2019
09:00 - 17:00   PST (GMT -8)
January 30, 2019 1 day
Jan 30
Live San Jose , California , United States English Subscription Only REGISTER  ›
March 13, 2019
09:00 - 17:00   PST (GMT -8)
March 13, 2019 1 day
Mar 13
Live San Jose , California , United States English Subscription Only REGISTER  ›

click below to start a conversation with ANSYS

Contact Us
Contact Us
Contact