Course Image

ANSYS Twin Builder Getting Started


The basic class training will teach how to use ANSYS Twin Builder to design, modeling, analysis and optimization of high-performance systems that can eventually be deployed as Digital Twins. Most common applications are found in the automotive, aerospace/defense, and industrial automation industries. This training will introduce you to the Modelica standard and developing system models in Modelica. The training also covers how 3rd party models can be integrated in to using FMI, how ANSYS 3D solvers can be coupled to Twin Builder through co-simulation, and how Reduced Order Models can be generated for transient applications.

Learning Outcomes

  • Awareness of basic elements in the GUI
  • Navigation of the GUI to accomplish various modeling tasks
  • Awareness of component structures in Twin Builder
  • VHDL-AMS/SML based component modeling
  • Setup of the solver and simulation execution
  • Post processing of simulation results
  • Introduction to parametric studies and optimization
  • Differences between Causal and Acausal system modeling
  • Create a new Modelica model within Twin Builder
  • Components models parameterization
  • Compilation and Modelica models properties exposure
  • Modelica models integration in Twin Builder & code generation
  • Example of a multiphysics system modeling
  • How to generate a Reduced Order Model in Twin Builder
  • How to generate a Reduced Order Model for transient applications
  • How to integrate graphical panel into Twin Builder using Functional Mock-up Interface (FMI)


  • There is no prerequisite for this course.

Target Audience: System / Digital Twin Engineers

Teaching Method: Lectures and computer practical sessions to validate acquired knowledge.

Learning Options: Training materials for this course are available with a ANSYS Learning Hub Subscription. If there is no active public schedule available, private training can be arranged. Please contact us.


Twin Builder Getting Started



Agenda :

This is a 3-day classroom course covering both lectures and workshops. For virtual training, this course is covered over 3 x 2-hour sessions lectures only.

Virtual Classroom Session 1 / Live Classroom Day 1

  • Module 2 - GUI
  • Workshop 2.1 - Automotive Example
  • Workshop 2.2 - Water Pumping System
  • Module 3 - Component Libraries
  • Workshop 3.1 - Simple Motor Powertrain
  • Module 4 - Simulation Execution and Post Processing
  • Workshop 4.1 - Parameter Sweeping

Virtual Classroom Session 2 / Live Classroom Day 2

  • Module 5 - Feature Modelica
  • Workshop 5.1 – Bouncing Ball Problem
  • Module 6 – Feature Modelica IDE in Twin Builder
  • Workshop 6.1 – Simple Drive Train with PID Controller
  • Module 7 – Building Modelica Models in Twin Builder
  • Workshop 7.1 – Model of a Drive Train Power Dissipation
  • Module 8 – Feature Building Modelica Customization in Twin Builder
  • Workshop 8.1 – Modelica Coupling with CFD ROM

 Virtual Classroom Session 3 / Live Classroom Day 3

  • Module 9 – Functional Mock-up Interface (FMI) and Digital Twins
  • Workshop 9.1 – Import Export FMI in Twin Builder
  • Module 10 – Feature ROM Introduction and Co-Simulation in Twin Builder
  • Workshop 10.1 – Co-Simulation between Twin Builder and ANSYS Solvers
  • Module 11 – ROM Interfaces
  • Workshop 11.1 – Twin Builder ROM Interfaces
  • Module 12 – Dynamic ROM Builder
  • Workshop 12.1 – Using Dynamic ROM Builder
  • Module 13 – Feature Rapid Prototyper
  • Workshop 13.1 – Design a Graphical Panel for SCADE Suite
Filter By Country :
Date/Time Duration Event Type Location Language Class Cost
2019년 12월 4일
09:30 - 16:30   CST (GMT +8)
2019년 12월 4일 1 Day
Dec 4
Live Hsinchu , Taiwan Chinese 630   USD Register  ›
2019년 11월 19일
15:00 - 17:00   CET (GMT +1)
2019년 11월 19일 6 Sessions
Nov 19-22, 25-26
Virtual Virtual - WebEx English Subscription Only Register  ›

문의 및 자료 요청은 아래 버튼을 클릭하십시오.

Contact Us