Case Study
Introduction
An electronic engineering (E/E) module supplier had to meet an automotive OEM’s reliability metric of 97% (less than 3% risk of failure) over a 10-year durability period for a new E/E module. To determine whether the supplier’s product meets the reliability goal, the automotive OEM requested that the modules be subjected to thermal cycling tests with OEM-defined parameters.
Challenges
The E/E module supplier’s product operated throughout the tests; however, post-test tear downs revealed that the module had suffered cracks in solder joints due to solder fatigue. As a result, the automotive OEM rejected the supplier’s new module.
Engineering Solution
The E/E module supplier suspected that the automotive OEM’s thermal cycling parameters were unnecessarily severe. The supplier commissioned the use of Ansys Sherlock to test the module’s field durability against the thermal cycling tests using simulation-aided testing. A 3D FEA model was built of the supplier’s E/E module in a CAE environment, using the OEM’s definition of annual thermal cycling to model the 10-year field profile.
Benefits
- Sherlock’s analysis found that the OEM’s 10-year life test correlated to what would be a 20.2-year field life, more than doubling the OEM’s intended lifespan.
- Sherlock determined that the supplier’s module achieved a successful 10-year life at 49% of the OEM’s thermal cycling test time.
- Sherlock demonstrated that the risk failure for the supplier’s module was 1.8%, a reliability metric of 98.2%.
- After careful review of Sherlock’s analysis, the OEM accepted the supplier’s module, and the OEM modified their testing parameters for future reliability qualification programs.
Ansys가 귀사를 위해 무엇을 할 수 있는지 알아보십시오.
Ansys가 귀사를 위해 무엇을 할 수 있는지 알아보십시오.
Contact Us
문의하기
