Course Image

ANSYS Fluent Getting Started (Single Window Workflow)

Overview

This course teaches the essential skills you will need to start performing basic computational fluid dynamics (CFD) simulations on your own using ANSYS Fluent software.  Instructor demos and hands-on workshops cover every aspect of the end-to-end CFD workflow, including how to prepare watertight CAD models in ANSYS SpaceClaim, and how to perform the entire meshing and solution process in the single-window ANSYS Fluent user interface using the task-based, guided workflow for meshing imported, watertight CAD geometry.

All workshops begin with the import of a CAD model into Fluent and proceed through the entire single window workflow process of meshing, solving and postprocessing.

This course provides instruction in using features of ANSYS Fluent Software that are not found in versions of the software older than ANSYS Fluent 2019 Release 1. Users for whom ANSYS Fluent 2019 Release 1 is not available should register for ANSYS Fluent Getting Started course.

 

Prerequisites

  • A technical education and background in fluid mechanics and heat transfer is recommended but not mandatory.  An engineering degree is not required.

Target Audience: Fluids Engineers, Combustion Engineers, Thermal Engineers and Aerodynamcis Engineers.

Teaching Method: Lectures and computer practical sessions to validate acquired knowledge. A major emphasis is placed on teaching by software demonstration and on the development of a solution to a design challenge from start to finish.

ANSYS Fluent Getting Started SWF

 

Agenda SUBSCRIBE TODAY   Learn about our subscriptions.

Topics Covered :

  • Computational fluid dynamics (CFD) simulations using the single window workflow in ANSYS Fluent including basic steady state flow simulation, heat transfer, turbulent flow and unsteady flow simulation.

  • Use of ANSYS SpaceClaim Direct Modeler for preparation of CAD geometry for use in ANSYS Fluent CFD simulations

Agenda :

This course is a 3 day classroom course covering both lectures and workshops. For virtual training, this course is covered over 6 x 2 hour sessions, lectures only.

Virtual Classroom Session 1 \ Live Classroom Day 1

  • Module SC01 - Introduction
  • Lecture 1.0: Introduction to ANSYS Workbench
  • Lecture 1.1: SpaceClaim Core Skills
  • Workshop 1.1: Basics
  • Workshop 1.2: Sketching in SpaceClaim
  • Module SC02 - Creating Geometry
  • Lecture 2.1: Creating Geometry in SpaceClaim
  • Workshop 2.1: Creating Geometry

Virtual Classroom Session 2 \ Live Classroom Day 1

  • Module SC03 - Repairing Geometry
  • Lecture 3.1: Repairing Geometry in SpaceClaim
  • Workshop 3.1: Repairing Geometry
  • Module SC04 -- CFD Modeling Concepts
  • Lecture 4.1: CFD Modeling Concepts in SpaceClaim
  • Workshop 4.1: Preparing Model for CFD Analysis
  • Module SC05 - Parameters and Preparing Models for Fluent
  • Lecture 5.1: Parameters and Preparing Models for Fluent
  • Workshop 5.1: Parameters

Virtual Classroom Session 3 \ Live Classroom Day 2

  • Module 01 - CFD Overview
  • Lecture 01: Introduction to ANSYS Workbench
  • Workshop 01: Mixing Tee
  • Module 02 - Watertight Geometry Workflow Overview and Surface Meshing
  • Lecture 02: Watertight Geometry Workflow Overview and Surface Meshing
  • Workshop 02: Mixer
  • Module 03 - Geometry Description and Volume Meshing
  • Lecture 03: Geometry Description and Volume Meshing
  • Workshop 03.1: Heat Sink
  • Workshop 03.2: Arcjet

Virtual Classroom Session 4 \ Live Classroom Day 2

  • Module 04 - Setting Up Domain
  • Lecture 04: Setting Up Domain and Solution Mode UI Demo
  • Workshop 04: Flow Distribution in a Manifold
  • Module 05 - Setting Up Physics
  • Lecture 05: Setting Up Physics
  • Workshop 05: Flow in a Mixing Elbow
  • Module 06 - Postprocessing
  • Lecture 06: Postprocessing
  • Workshop 06: Flow and Heat Transfer in a Tube Bundle

Virtual Classroom Session 5 \ Live Classroom Day 3

  • Module 07 - Solving
  • Lecture 07: Solving
  • Workshop 07: Solving
  • Module 08 - Best Practices
  • Lecture 08: Best Practices
  • Workshop 08: Transonic Flow over an Airfoil

Virtual Classroom Session 6 \ Live Classroom Day 3

  • Module 09 - Turbulence
  • Lecture 09: Turbulence
  • Workshop 09: Backward Facing Step
  • Module 10 - Heat Transfer
  • Lecture 10: Heat Transfer
  • Workshop 10: Electronics Cooling
  • Module 11 - Transient Flow
  • Lecture 11: Transient Flow
  • Workshop 11: Vortex Shedding

Filter By Country :
Date/Time Duration Event Type Location Language Class Cost
mai 27 2019
09:00 - 17:30   CEST (GMT +2)
mai 27 2019 3 days
May 27-29
Live Wavre , Belgium English 1950   EUR
mai 7 2019
9:00 - 17:00   CEST (GMT +2)
mai 7 2019 3 days
May 7-9
Live Otterfing , Germany German 1950   EUR
mai 28 2019
9:00 - 18:00   CEST (GMT +2)
mai 28 2019 3 days
May 28-30
Live Madrid , Spain Spanish 1950   EUR
juin 4 2019
09:00 - 17:30   CEST (GMT +2)
juin 4 2019 3 days
Jun 4-6
Live Montigny-le-Bretonneux , France French 1950   EUR
juillet 9 2019
9:30 - 17:30   CEST (GMT +2)
juillet 9 2019 3 Days
Jul 9-11
Live Milano , Italy Italian 1950   EUR
mai 21 2019
9:15 - 17:00   BST (GMT +1)
mai 21 2019 3 days
May 21-23
Live Abingdon , England , United Kingdom English 1500   GBP
juin 4 2019
9:15 - 17:00   BST (GMT +1)
juin 4 2019 3 Days
June 4-6
Live Sheffield , United Kingdom English 1500   GBP
mai 13 2019
10:30 - 12:30   CEST (GMT +2)
mai 13 2019 6 sessions
May 13-20
Virtual Virtual - WebEx English Subscription Only Register  ›
juillet 15 2019
10:30 - 12:30   CEST (GMT +2)
juillet 15 2019 6 sessions
Jul 15-19, 22
Virtual Virtual - WebEx English Subscription Only Register  ›
mai 8 2019
09:30 - 18:00   IST (GMT +5:30)
mai 8 2019 3 days
May 8 - 10
Live Noida , India English 36000   INR Register  ›
mai 15 2019
09:30 - 18:00   IST (GMT +5:30)
mai 15 2019 3 days
May 15 - 17
Live Chennai , India English 36000   INR Register  ›
juin 4 2019
09:30 - 18:00   IST (GMT +5:30)
juin 4 2019 3 days
Jun 4 - 6
Live Pune , India English 36000   INR Register  ›

cliquez ci-dessous pour commencer une conversation avec ANSYS

Contactez-nous
Contact Us
Contactez-Nous