Course Image

ANSYS Fluent Getting Started

Overview

This course teaches the essential skills you will need to start performing basic computational fluid dynamics (CFD) simulations on your own using ANSYS Fluent software.


In part 1 of this course (modules 1 to 3), the instructor demos and hands-on workshops cover every aspect of the end-to-end CFD workflow, including working with CAD models in ANSYS SpaceClaim, creating quality CFD meshes with ANSYS Meshing, and all aspects of performing CFD simulations in ANSYS Fluent.  Course modules are organized into geometry (ANSYS SpaceClaim), meshing (ANSYS Meshing) and solver (ANSYS Fluent) topics, and each of the three course modules takes students through a complete end to end workflow of a different CFD problem.


Part 2 of the course (modules 4 to 10) builds on skills learned in Part 1 to enable students to become proficient in performing basic CFD simulations.


It is strongly recommended that students complete both parts of the course.

Prerequisites

  • A technical education and background in fluid mechanics and heat transfer is recommended but not mandatory.  An engineering degree is not required.

Target Audience: Engineers and Designers

Teaching Method:Lectures and computer practical sessions to validate acquired knowledge.

ANSYS Fluent Getting Started

Agenda SUBSCRIBE TODAY   Learn about our subscriptions.

Agenda :

This is a 3 day classroom course covering both lectures and workshops. For virtual training, this course is covered over 5 x 2 hour sessions, lectures only.

  • Virtual Classroom Session 1 / Live Classroom Day
    • Module 1: Introduction to CFD

    • Lecture 1.1: Introduction to ANSYS Workbench

    • Lecture 1.2: Overview of CFD Process

    • Workshop 1.1: Mixing Tee

    • Module 2: Setting Up Domain

    • Lecture 2.1: SCDM essentials

    • Workshop 2.1: Manifold (SCDM)

    • Lecture 2.2:  Ansys meshing essentials

    • Workshop 2.2: Manifold (Meshing)

    • Lecture 2.3 : User Interface and Setting Up Domain

    • Workshop 2.3: Manifold (Fluent)

 

  • Virtual Classroom Session 2 / Live Classroom Day 1
    • Module 3: Setting Up Physics

    • Lecture 3.1:  Basic SCDM Operations  

    • Workshop 3.1: Mixing Elbow (SCDM)

    • Lecture 3.2:  Global Mesh Control

    • Workshop 3.2: Mixing Elbow (Meshing)

    • Lecture 3.3: Setting Up Physics

    • Workshop 3.3: Mixing Elbow (Fluent)

 

  • Virtual Classroom Session 3 / Live Classroom Day 2
    • Module 4: Postprocessing Fluid Simulations

    • Lecture 4.1: Geometry Handling and Repair

    • Workshop 4.1: Tube Bundle (SCDM)

    • Lecture 4.2: Local Mesh Controls

    • Workshop 4.2: Tube Bundle (Meshing)

    • Lecture 4.3: Postprocessing

    • Workshop 4.3: Tube Bundle (Fluent)

 

  • Virtual Classroom Session 4 / Live Classroom Day 2
    • Module 5: Solving

    • Lecture 5.1: Pull, Move, Fill and Blend

    • Workshop 5.1: Mixing Elbow (SCDM)

    • Lecture 5.2: Mesh Methods and Selective Meshing

    • Workshop 5.2: Mixing Elbow (Meshing)

    • Lecture 5.3: Solving

    • Workshop 5.3: Solving (Fluent)

    • Module 6: Parameters and Design Points

    • Lecture 6.1: Driving Dimensions & Parameters, Components & Assemblies

    • Workshop 6.1: Ball Valve (SCDM)

    • Lecture 6.2: Ball Valve Meshing Demo

    • Workshop 6.2: Ball Valve (Meshing)

    • Lecture 6.3: Parameters and Design Points

    • Workshop 6.3: Ball Valve Parametric Study

 

  • Virtual Classroom Session 5 / Live Classroom Day 3
    • Module 7: CFD Best Practices

    • Module 8: Turbulence

    • Module 9: Heat Transfer

    • Module 10: Transient Flow

Filter By Country :
Date/Time Duration Event Type Location Language Class Cost
mai 29 2019
10:00 - 17:00   KST (GMT +9)
mai 29 2019 3일
May 29-31(일정변경)
Live Seoul , South Korea Korean 900000   KRW Register  ›
avril 22 2019
11:00 - 13:00   EST (GMT -5)
avril 22 2019 5 Sessions
Apr 22-26
Virtual Virtual - WebEx English Subscription Only Register  ›
juin 4 2019
0830 - 1700   CST (GMT -6)
juin 4 2019 3 days
Jun 4-6
Live Bloomington , Minnesota , United States English Subscription Only Register  ›
mai 14 2019
09:00 - 17:00   CST (GMT -6)
mai 14 2019 3
May 14-16
Live Houston , Texas , United States English Subscription Only Register  ›
juin 11 2019
08:30 - 17:00   PST (GMT -8)
juin 11 2019 3
Jun 11-13
Live San Jose , California , United States English Subscription Only Register  ›

cliquez ci-dessous pour commencer une conversation avec ANSYS

Contactez-nous
Contact Us
Contactez-Nous