Course Image

ANSYS Mechanical Getting Started

Overview

New to ANSYS Mechanical? This is the place to start. After completing this course you’ll understand the complete end-to-end procedure for conducting basic linear static structural analyses and will be able to apply it to the solution of your own analysis problems. Just as important, you’ll learn several techniques to improve the efficiency of your solutions and the fidelity of your results. You’ll also have a firm foundation for studying many advanced analysis techniques in ANSYS Mechanical.

Prerequisites

  • A technical education and a background in the fundamentals of finite element analysis are recommended. An engineering degree is not required.

Target Audience: Engineers and Designers

Teaching Method: A major emphasis is placed on teaching by software demonstration and on the development of a solution to a design challenge from start to finish. Students will then have an opportunity to either repeat the instructor’s steps or work on an additional design challenge workshop. The goal is to give students the knowledge and experience they’ll need to confidently apply what they’ve learned to their own design challenges.

Mechanical Getting Started

 

 

Agenda SUBSCRIBE TODAY  

Topics Covered :

  • Introductory Demonstration

  • Problem Statement

  • Introduction to the Design Challenge

  • Modeling Approach and Considerations

  • Geometry

  • Coordinate Systems

  • Connections

  • Mesh

  • Analysis Settings

  • Loads

  • Supports

  • Postprocessing

  • Validation

  • Parametric Update

  • Alternative/Advanced Modeling Approaches

  • Geometric Considerations for Improved Efficiency

  • Obtaining More Realistic Interfaces between Parts

  • Additional Mesh Methods to Improve Fidelity

  • Advanced Postprocessing for Additional Insight

  • Parameters and Leveraging Associativity

Agenda :

This is a 2 day classroom course covering both lectures and workshops. For virtual training, this course is covered over 4 x 2 hour sessions lectures only.

  • Virtual Classroom Session 1 / Live Classroom Day 1
    • Module 01: Introductory Demonstration
    • Workshop 01
    • Module 02: Problem Statement
    • Workshop 02
    • Module 03: Modeling Approach and Considerations
    • Workshop 03
    • Module 04: Geometry and Coordinate Systems
    • Workshop 04
  • Virtual Classroom Session 2 / Live Classroom Day 1
    • Module 05: Connection
    • Workshop 05
    • Module 06: Mesh
    • Workshop 06
    • Module 07: Analysis Settings, Loads, and Supports
    • Workshop 07
    • Module 08: Postprocessing and Validation
    • Workshop 08
    • Module 09: Parametric Update of Model
    • Workshop 09
  • Virtual Classroom Session 3 / Live Classroom Day 2
    • Module 10: Alternative/Advanced Modeling Approaches

    • Workshop 10

    • Module 11: Geometric Considerations to Improve Efficiency

    • Workshop 11

    • Module 12: Obtaining More Realistic Interfaces Among Bodies

    • Workshop 12

    • Module 13: Additional Mesh Methods for Improved Fidelity

    • Workshop 13

  • Virtual Classroom Session 4 / Live Classroom Day 2
    • Module 14: More Analysis Settings, Loads, and Supports

    • Workshop 14

    • Module 15: Advanced Postprocessing for Additional Insight

    • Workshop 15

    • Module 16: Parameters and Leveraging Associativity

    • Workshop 16

Filter By Country :
Date/Time Duration Event Type Location Language Class Cost
28 May 2019
9:00 - 17:00   CEST (GMT +2)
28 May 2019 2 days
May 28-29
Live Otterfing , Germany German 1300   EUR
14 March 2019
9:00 AM - 6:00 PM   CET (GMT +1)
14 March 2019 2 Days
Mar 14.15
Live Madrid , Spain Spanish 1300   EUR Register  ›
28 February 2019
9:30 AM - 5:30 PM   CET (GMT +1)
28 February 2019 2 Days
Feb 28, Mar 1
Live Milano , Italy Italian 1300   EUR Register  ›
25 March 2019
9:15 AM - 5:00 PM   GMT (GMT)
25 March 2019 2 Days
Mar 25,26
Live Sheffield , United Kingdom English 1000   GBP
07 March 2019
09:30 - 18:00   IST (GMT +5:30)
07 March 2019 1 day - Part 1
Mar 07
Live Noida , India English 12000   INR Register  ›
08 March 2019
09:30 - 18:00   IST (GMT +5:30)
08 March 2019 1 day - Part 2
Mar 08
Live Noida , India English 12000   INR Register  ›
06 May 2019
13:00 - 15:00   EST (GMT -5)
06 May 2019 4 Sessions
May 6-9
Virtual Virtual - WebEx English Subscription Only Register  ›
04 March 2019
16:00 - 18:00   EST (GMT -5)
04 March 2019 2 sessions - Part 1
Mar 4-5
Virtual Virtual - WebEx English Subscription Only Register  ›
06 March 2019
16:00 - 18:00   EST (GMT -5)
06 March 2019 2 sessions - Part 2
Mar 6-7
Virtual Virtual - WebEx English Subscription Only Register  ›
26 February 2019
10:00 - 17:00   KST (GMT +9)
26 February 2019 2일
Feb 26-27
Live Seoul , South Korea Korean 600000   KRW Register  ›
12 March 2019
10:00 - 17:00   KST (GMT +9)
12 March 2019 2일
Mar 12-13
Live Seoul , South Korea Korean 600000   KRW Register  ›
05 March 2019
08:30 - 17:00   EST (GMT -5)
05 March 2019 1 Day - Part 1
Mar 5
Live Ann Arbor , Michigan , United States English Subscription Only Register  ›
06 March 2019
8:30 AM - 5:00 PM   EST (GMT -5)
06 March 2019 1 Day - Part 2
Mar 6
Live Ann Arbor , Michigan , United States English Subscription Only Register  ›
04 June 2019
08:30 - 17:00   EST (GMT -5)
04 June 2019 2 Days
Jun 4-5
Live Ann Arbor , Michigan , United States English Subscription Only Register  ›
06 March 2019
08:30 - 17:00   CST (GMT -6)
06 March 2019 1 Day - Part 1
Mar 6
Live Bloomington , Minnesota , United States English Subscription Only Register  ›
07 March 2019
08:30 - 17:00   CST (GMT -6)
07 March 2019 1 Day - Part 2
Mar 7
Live Bloomington , Minnesota , United States English Subscription Only Register  ›
09 May 2019
08:30 - 17:00   CST (GMT -6)
09 May 2019 2 Days
May 9-10
Live Bloomington , Minnesota , United States English Subscription Only Register  ›
27 March 2019
08:30 - 17:00   EST (GMT -5)
27 March 2019 1 Day - Part 1
Mar 27
Live Concord , Massachusetts , United States English Subscription Only Register  ›
28 March 2019
08:30 - 17:00   EST (GMT -5)
28 March 2019 1 Day - Part 2
Mar 28
Live Concord , Massachusetts , United States English Subscription Only Register  ›
22 May 2019
08:30 - 17:00   EST (GMT -5)
22 May 2019 2 Days
May 22-23
Live Concord , Massachusetts , United States English Subscription Only Register  ›
12 March 2019
08:30 - 17:00   EST (GMT -5)
12 March 2019 1 Day - Part 1
Mar 12
Live Canonsburg , Pennsylvania , United States English Subscription Only Register  ›
21 May 2019
08:30 - 17:00   EST (GMT -5)
21 May 2019 2 Days
May 21-22
Live Canonsburg , Pennsylvania , United States English Subscription Only Register  ›
13 March 2019
08:30 - 17:00   EST (GMT -5)
13 March 2019 1 Day - Part 2
Mar 13
Live Canonsburg , Pennsylvania , United States English Subscription Only Register  ›
13 March 2019
09:00 - 17:00   CST (GMT -6)
13 March 2019 1 Day - Part 1
Mar 13
Live Houston , Texas , United States English Subscription Only Register  ›
14 March 2019
09:00 - 17:00   CST (GMT -6)
14 March 2019 1 Day - Part 2
Mar 14
Live Houston , Texas , United States English Subscription Only Register  ›
05 June 2019
09:00 - 17:00   CST (GMT -6)
05 June 2019 2 Days
Jun 5-6
Live Houston , Texas , United States English Subscription Only Register  ›
15 May 2019
09:00 - 17:00   PST (GMT -8)
15 May 2019 2 Days
May 15-16
Live Irvine , California , United States English Subscription Only Register  ›
03 April 2019
08:30 - 17:00   PST (GMT -8)
03 April 2019 2 Days
April 3-4
Live San Jose , California , United States English Subscription Only Register  ›
05 June 2019
08:30 - 17:00   PST (GMT -8)
05 June 2019 2 Days
Jun 5-6
Live San Jose , California , United States English Subscription Only Register  ›

click below to start a conversation with ANSYS

Contact Us
Contact Us
Contact