Save Query
Load Query

Narrow Your Search

Language

Resource Type

Product Category

Product Name

Industry

Sub Industry

Show Results
1 - 10 Of 69 Results
1 2 3 4 5 7
Arrow

Targeting a Tumor - Article - ANSYS Advantage - V12 I2

By devising a new computational method that tracks the flow of therapeutic drug particles in an aerosol from the lips to the lungs, researchers can deposit a drug on a targeted lung tumor with 90 percent efficiency. This is a major improvement over the 20 percent efficiency of conventional aerosol treatment methods. One key to the success of this new computational method is the development of a human digital twin that can be made patient-specific using the real geometry of the patient’s lungs..

Author: School of Chemical Engineering, Oklahoma State University Type: Article Date:
Product Name: ANSYS CFD, ANSYS ACT
Product Category: Fluids, Platform
Industry: Healthcare - BioMed, High Tech
Sub Industry: Respiratory, Diagnosis and Personalized Medicine


View

Arrow

Cool Idea for Engine Design - Article - ANSYS Advantage - V12 I2

Achates Power has developed a radically improved two-stroke opposed-piston internal combustion engine that increases fuel efficiency and reduces greenhouse gas emissions. ANSYS simulation tools help the company to shorten design iteration time, minimize hardware prototypes and reduce the development time of new engines by approximately one year.

Author: Achates Power Inc. Type: Article Date:
Product Name: ANSYS Mechanical, ANSYS Workbench, ANSYS CFD
Product Category: Multiphysics, Fluids, Structures, Platform
Industry: Automotive


View

Arrow

A Window into Automotive Noise - Article - ANSYS Advantage - V12 I1

The interior of a vehicle can be distractingly loud due to wind turbulence, especially at highway speeds. At Corning, engineers combined aerodynamic and vibro-acoustic analysis in ANSYS Workbench to determine how glazing can help control interior noise.

Author: Corning Type: Article Date:
Product Name: ANSYS CFD, ANSYS Fluent, ANSYS CFD Enterprise, ANSYS CFD Professional
Product Category: Fluids
Industry: Automotive


View

Arrow

Turn Up the Heat in a Rooftop Heating Unit - Article - ANSYS Advantage - V12 I1

In designing a new rooftop heating unit, AAON engineers needed to deliver higher airflow while maintaining the same footprint as an earlier design. The team used ANSYS computational fluid dynamics (CFD) software to calculate airflow through the heat exchanger of the unit and iterate to a design that meets energy efficiency, airflow and heat transfer requirements. The use of simulation in this project saved 60 to 80 hours of physical lab work compared to traditional design methods.

Author: AAON Type: Article Date:
Product Name: ANSYS CFX, ANSYS CFD, ANSYS CFD Enterprise, ANSYS CFD Professional
Product Category: Fluids
Industry: Construction
Sub Industry: Building HVAC


View

Arrow

Cloud Seeds Simulation for SMES - Article - ANSYS Advantage - V11 I2

Small and medium-size manufacturers need economical access to simulation during their design cycles to remain competitive. This requires a software stack to make it easier for these companies to expand their use of high-fidelity modeling tools on cloud computing resources.

Author: TheUberCloud, Inc. Type: Article Date:
Product Name: ANSYS Fluent, ANSYS CFD, ANSYS CFD Enterprise, ANSYS CFD Premium, ANSYS CFX
Product Category: High Performance Computing, Fluids, Cloud and IT Solutions


View

Arrow

Picking Up Steam - Article - ANSYS Advantage - V11 I2

The design of many products is complicated by conflicting design objectives. For example, minimizing pressure drop for heat recovery steam generator inlets also requires maintaining uniform flow velocity at the entry to the boiler. KeelWit engineers developed an optimization algorithm that was applied by leveraging ANSYS ACT to manage trade-offs and reduce pressure drop by up to 25 percent across two families of boilers. This substantially improved performance.

Author: KeelWit Technology SL Type: Article Date:
Product Name: ANSYS ACT, ANSYS CFD, ANSYS CFD Enterprise, ANSYS CFD Premium, ANSYS Fluent, ANSYS DesignXplorer, ANSYS DesignModeler
Product Category: Fluids
Industry: Energy


View

Arrow

Cooking with ANSYS SpaceClaim - Article - ANSYS Advantage - V11 I2

When Jacobs Analytics started designing a barbecue smoker, it took two weeks using traditional solid modeling to create a single design iteration ready for computational fluid dynamics (CFD) simulation. Since switching to ANSYS SpaceClaim, the company can now edit the design to create a new iteration in only five minutes. After generating and simulating about 500 designs, the design and engineering company finalized a version that offers substantially higher performance than existing smokers.

Author: Jacobs Analytics Type: Article Date:
Product Name: ANSYS SpaceClaim, ANSYS CFD, ANSYS CFD Enterprise, ANSYS CFD Premium
Product Category: Fluids
Industry: Consumer Products


View

Arrow

Bright Idea for Headlights - Article - ANSYS Advantage - V11 I2

Momentive Performance Materials successfully reduced the time required for physical testing by using simulation to optimize the heat sink design for an LED automotive headlight. This simulation yielded a design that demonstrated a two-fold increase in the brightness of the headlight while operating at the same temperature.

Author: Momentive Performance Materials Type: Article Date:
Product Name: ANSYS Fluent, ANSYS CFD, ANSYS CFD Enterprise, ANSYS CFD Premium
Product Category: Fluids
Industry: Automotive


View

Arrow

Electrifying Vehicle - Article - ANSYS Advantage - V11 I2

Lucid’s new luxury-class electric vehicle (EV) is designed to compete with the leaders in the high-end EV market. Lucid engineers extensively leveraged ANSYS multiphysics simulation software to improve the operation of most of the vehicle’s subsystems by accounting for a wide range of performance factors to create a digital prototype. The use of a consolidated engineering simulation platform was critical to facilitate cooperation across the many different engineering disciplines on the design team, resulting in a wide range of performance improvements — both for the car and the engineering team.

Author: Lucid Motors Type: Article Date:
Product Name: ANSYS Workbench, ANSYS CFD, ANSYS CFD Enterprise, ANSYS CFD Premium, ANSYS Fluent, ANSYS DesignXplorer, ANSYS Maxwell, ANSYS Mechanical
Product Category: Multiphysics, Fluids, Structures
Industry: Automotive


View

Arrow

Creating a Digital Twin for a Pump - Article - ANSYS Advantage - V11 I1

Simulation has long been an integral part of the product development process; it greatly improves product performance, reduces development costs and gets the product to market much more quickly. The technologies that underpin the Internet of Things now make it possible to go a step further by integrating simulation with products as they exist and operate in the real world. This opens up a whole new era in value creation for companies to optimize operations and maintenance, as well as further accelerate the new-product development process. ANSYS worked with PTC, Flowserve, National Instruments and HPE to demonstrate this, showing how a simulation model of an operating pump can diagnose and solve operating problems faster than was ever possible before.

Author: ANSYS/PTC Type: Article Date:
Product Name: ANSYS CFD Enterprise, ANSYS CFD, ANSYS CFD Premium, ANSYS Simplorer, ANSYS SCADE Suite
Product Category: Fluids, Systems, Embedded Software
Industry: Industrial Equipment


View

1 - 10 Of 69 Results
1 2 3 4 5 7
Contact