Save Query
Load Query

Narrow Your Search

Language

Resource Type

Product Category

Product Name

Industry

Sub Industry

Show Results
1 - 10 Of 66 Results
1 2 3 4 5 7
Arrow

ANSYS + SeaTwirl AB - Case Study

SeaTwirl uses the ANSYS simulation environment for all aspects of design analyses: computational fluid dynamics (CFD), hydrodynamics and structural. This facilitates the sharing of results across the company’s divisions and speeds development as a result. The shared environment also simplifies the third-party review process.

Author: ANSYS, Inc. Type: Case Study Date:
Product Name: ANSYS Fluent, ANSYS Mechanical, ANSYS Aqwa
Product Category: Fluids, Structures


View

Arrow

ANSYS + volabo GmbH - Case Study

Read this case study to learn how VOLABO used multiphysics simulation software obtained through the ANSYS Startup Program to develop the first 48 V high power traction drive, which is 25 percent more efficient than conventional electrical drives and does not need rare earth magnets for production. What makes the ISCAD drive unique is the virtual gearbox that enables the motor to continuously adapt to the load profile and thus make better use of the battery capacity.

Author: ANSYS, Inc. Type: Case Study Date:
Product Name: ANSYS Maxwell, ANSYS Icepak, ANSYS Mechanical, ANSYS Electronics Desktop
Product Category: Structures, Fluids, Electronics
Industry: Automotive


View

Arrow

Winfoor Case Study

Rotor blades are causing big problems for wind power industry. They are expensive, heavy and made in one piece. Read this case study to learn how Winfoor used ANSYS simulation solutions to analyze a precise, optimized design to drive the wind industry and make it more competitive as an energy source.

Author: ANSYS, Inc. Type: Case Study Date:
Product Name: ANSYS Fluent, ANSYS Mechanical, ANSYS SpaceClaim
Product Category: Fluids, Structures, Multiphysics
Industry: Energy


View

Arrow

Zunum Aero - Case Study

Zunum Aero manufactures commercial hybrid-to-electric aircraft that are powered by quiet range-optimized powertrain and propulsion technologies. It uses ANSYS simulation software to analyze propulsion components for structural integrity, fluid flow analysis, cooling system design and overall design optimization.

Author: ANSYS, Inc. Type: Case Study Date:
Product Name: ANSYS CFX, ANSYS Fluent, ANSYS Mechanical
Industry: Aerospace and Defense
Sub Industry: Aircraft


View

Arrow

FDX - Case Study

FDX produces OsciJet nozzles that emit a sweeping or pulsating jet stream of fluid without any moving parts to save resources by optimizing flow processes. Building and testing prototypes was a bottleneck in their design process, so they used ANSYS CFX and ANSYS Workbench to accelerate the process by a factor of 360, greatly improving their time-to-market.

Author: ANSYS, Inc. Type: Case Study Date:
Product Name: ANSYS CFX, ANSYS Mechanical, ANSYS Workbench
Product Category: Fluids


View

Arrow

ANSYS + watttron - Case Study

Thermoforming is an important polymer production process; the heating of the initial polymer sheet is essential for the quality, quantity and efficiency of the process. Read this case study to learn how watttron developed an innovative heating technology that allows inhomogeneous, precisely defined heating of surfaces on a very small scale. This innovation depends on a powerful algorithm that iteratively updates the temperature profile depending on the results of the thermoforming simulation using ANSYS solutions.

Author: ANSYS, Inc. Type: Case Study Date:
Product Name: ANSYS Mechanical, ANSYS Polyflow, ANSYS SpaceClaim
Product Category: Structures


View

Arrow

TibaRay, Inc - Case Study

TibaRay is using ANSYS multiphysics (electromechanical, thermal, mechanical) simulations to design the next generation of Radiation Therapy (RT) systems for cancer treatment. Their PHASER project is overcoming challenges to current RT systems, such as collateral damage to normal organs, the need for better accuracy/focusing, motion control, cost and access, especially in developing world. Read this case study to learn more.

Author: TibaRay, Inc. Type: Case Study Date:
Product Name: ANSYS HFSS, ANSYS Mechanical, ANSYS Fluent
Product Category: Electronics, Fluids
Industry: Healthcare - BioMed


View

Arrow

HuMoTech - Case Study

HuMoTech engineers used ANSYS Mechanical to achieve a 25 percent weight reduction of the prosthesis end-effector, which allows their device to more accurately emulate a wider range of prosthetic devices. This reduces the design and testing time of prosthetic devices and results in a better fit, which improves the patient’s quality of life, while helping clinicians and researchers to be more effective.

Author: HuMoTech Type: Case Study Date:
Product Name: ANSYS Mechanical
Industry: Healthcare - BioMed


View

Arrow

American Boronite Corporation - Case Study

As a manufacturer of boron nitride nanotubes, we must optimize efficiency at each stage of our continuous production system to scale up effectively. With ANSYS computational fluid dynamics (CFD) software, we can simulate many different configurations of our process at the same time, thus saving time and money during process development. Our simulation results have also inspired new and improved designs that have led to significant development progress.

Author: American Boronite Corporation Type: Case Study Date:
Product Name: ANSYS Workbench, ANSYS Mechanical, ANSYS Fluent, ANSYS CFD
Product Category: Fluids, Structures


View

Arrow

Autorient - Case Study

Autorient targets solutions for positioning and control of autonomous machines, robots and vehicles. As the market moves toward smaller products at lower cost with higher measurement precision, engineering simulation enables us to push design limits and to optimize systems.

Author: Autorient AS Type: Case Study Date:
Product Name: ANSYS Mechanical, ANSYS Maxwell


View

1 - 10 Of 66 Results
1 2 3 4 5 7
 
Contact