Save Query
Load Query

Narrow Your Search

Language

Resource Type

Product Category

Product Name

Industry

Sub Industry

Show Results
1 - 10 Of 452 Results
1 2 3 4 5 46
Arrow

ANSYS Fluent Fault-Tolerant Workflow Speeds Meshing for Dirty, Non-watertight Geometries

Join us for this free webinar that spotlights how ANSYS Fluent’s new fault-tolerant workflow may be used to simplify and speed meshing for even the dirtiest geometries with no geometry preparation required.

  • Learn how the mesh wrapper seals leakages and imperfections to virtually eliminate manual efforts otherwise needed to patch and repair geometries.
  • Understand how the task-based workflow guides users through the meshing process, enabling them to quickly achieve maximum results with minimum training.
  • Compare and contrast Fluent’s fault-tolerant workflow with the workflow for watertight geometries.
  • Discover how to effectively mesh a dirty geometry during a live demonstration.

Author: ANSYS, Inc. Type: Webinar Date:
Product Name: ANSYS Fluent
Product Category: Fluids


Request
Arrow

Erosion Analysis in ANSYS Fluent

In this webinar, we discuss erosion modeling and erosion mesh deformation capabilities in ANSYS Fluent. Material erosion under a sand–liquid flow is a serious problem in many engineering applications, especially oil and gas. The ability to predict the progress of erosion in pipelines is critical. The erosion process is complex and often depends on many factors, such as fluid parameters, particle parameters, impact parameters and material parameters. Depending upon the pipe wall material and the solid particle, erosion could be high, leading to material loss and geometry deformation. In some cases, the shape deformation due to erosion can change the flow behavior and, as a result, the erosion rate. Thus, it is important to be able to model shape deformation.

Author: Type: Webinar Date:
Product Name: ANSYS Fluent
Product Category: Fluids
Sub Industry: Oil and Gas


Request
Arrow

Improving the Design of Fuel Cells for the Aerospace and Defense Industry

Fuel cells can produce electricity from an external source of fuel and oxidizer. They are clean, quiet and highly efficient. Polymer electrolyte membrane (PEM) fuel cells (FCs) operate at lower temperatures than other types of fuel cells and are frequently employed in vehicles and personal mobility applications in the aerospace and defense industry. This webinar will focus on the application of the PEMFC module in ANSYS Fluent to both simple and complex fuel cell geometries to help understand the effects of geometric and operating parameters on device performance and thermal management.

Author: ANSYS, Inc. Type: Webinar Date:
Product Name: ANSYS Fluent
Industry: Aerospace and Defense


Request
Arrow

Fluent's Task-Based Fault-Tolerant Workflow Speeds Meshing Dirty Geometry

ANSYS Fluent includes a task-based, fault-tolerant workflow that simplifies and speeds meshing for non-watertight, dirty geometries. Watch how the mesh wrapper seals leakages and imperfections, while eliminating most of the manual patching and repairing of the geometry. (Cyclist geometry courtesy of Centre for Sports Engineering Research, Sheffield Hallam University.)

Author: Type: Video Date:
Product Name: ANSYS Fluent
Product Category: Fluids


View

Arrow

Designing Safer Ships Using Simulation: Ship-Hull Stability Prediction by ANSYS CFD

As part of the certification process, marine surface vessels and industrial floating structures undergo rigorous stability tests to insure the maximum safety and operability under extreme weather conditions.

In this on-demand webinar, we will demonstrate how CFD analysis can be used to gain insight into the stability performance of a representative Navy vessel using ANSYS Fluent. The free surface effects on the vessel were simulated using the Volume of Fluid Method, while the vessel motion was resolved using the 6-DOF solver.

Author: ANSYS, Inc. Type: Webinar Date:
Product Name: ANSYS Fluent
Product Category: Fluids


Request
Arrow

ANSYS + IRSI

IRSI designs, operates and manufactures pyrolysis equipment that produces biochar from residual biomass. To optimize the pyrolysis system, the company uses ANSYS Fluent to simulate the thermal decomposition of the biomass under variable operating conditions.

Author: ANSYS, Inc. Type: Case Study Date:
Product Name: ANSYS Fluent


View

Arrow

Engineering the Fully Electric Airplane - ANSYS Advantage - A&D 2019 - Article

All-electric aircraft are on the horizon. Engineers at magniX employ multiphysics simulation to develop powerful electric motors for propeller planes that could revolutionize the short-haul and middle-mile flight industry, making it more economical and convenient to take a 30-minute flight rather than a 2 ½-hour drive and a 1 ½-hour flight instead of an 8-hour drive.

Author: magniX Type: Article Date:
Product Name: ANSYS Mechanical, ANSYS Maxwell, ANSYS Fluent
Product Category: Electronics, Electronics - Electromechanical, Fluids, Structures, Multiphysics
Industry: Aerospace and Defense
Sub Industry: Aircraft, Aircraft OEMs and Suppliers


View

Arrow

Les nouveautés ANSYS Fluent 2019 R1

Ce webinar abordera une riche variété de nouveautés marquantes , qui affecteront tous les niveaux d'utilisation.

  • Interface utilisateurs améliorée
  • Pré-processing et intégration dans le nouveau workflow de maillage.
  • Expressions dans Fluent
  • Robustesse du solveur
  • Avancées par physique (turbulence; Multiphase, combustion,...)

Author: Type: Webinar Date:
Product Name: ANSYS Fluent
Product Category: Fluids


Request
Arrow

Directly Enter Expressions to Speed, Simplify Simulations in ANSYS Fluent 2019 R1

Learn about the exciting Fluent Expression Language capability included in ANSYS 2019 R1.

Have you ever tried to specify a parabolic inlet velocity profile or implement a simple thermostat-like heating/cooling boundary condition, but shied away because both require ANSYS Fluent user-defined functions (UDFs)? With the new Fluent Expression Language, UDFs will no longer be a barrier to these simple but essential boundary conditions.

This on-demand webinar will include live demonstrations to get you started using Fluent Expressions. Learn how it can shorten your learning curve and expand the scope of your CFD simulations.

Author: ANSYS, Inc Type: Webinar Date:
Product Name: ANSYS Fluent
Product Category: Fluids


Request
Arrow

Raise Your Productivity Using ANSYS Fluent Single-Window, Task-Based Workflow in ANSYS 2019 R1

View this on-demand webinar to explore how to optimize your workflow and increase engineering productivity with the exciting new ANSYS Fluent experience in ANSYS 2019 R1.

Get an exclusive look at live demonstrations and success stories from early users. Learn how Fluent reduces hands-on time and raises efficiency with a single-window task-based workflow, Mosaic-enabled meshing technology, a new Fluent user interface (UI) with drag-and-drop case loading and post-processing object display … and more.
  • Task-based watertight meshing workflow guides users through the process by presenting best practices in an organized interface.
  • Single-window workflow lets users mesh watertight geometries, set up the model, solve and post-process all in a single Fluent interface.
  • New Fluent user interface is faster for new users to learn and more efficient for experienced analysts.
  • Drag-and-drop to load mesh, case and data files.
  • Drag-and-drop to display post-processing objects such as mesh, contours, vectors and pathlines.

Author: ANSYS Type: Webinar Date:
Product Name: ANSYS Fluent
Product Category: Fluids


Request
1 - 10 Of 452 Results
1 2 3 4 5 46
 

click below to start a conversation with ANSYS

Contact Us
Contact Us
Contact