Save Query
Load Query

Narrow Your Search

Language

Resource Type

Product Category

Product Name

Industry

Sub Industry

Show Results
1 - 10 Of 140 Results
1 2 3 4 5 14
Arrow

Engineering the Fully Electric Airplane - ANSYS Advantage - A&D 2019 - Article

All-electric aircraft are on the horizon. Engineers at magniX employ multiphysics simulation to develop powerful electric motors for propeller planes that could revolutionize the short-haul and middle-mile flight industry, making it more economical and convenient to take a 30-minute flight rather than a 2 ½-hour drive and a 1 ½-hour flight instead of an 8-hour drive.

Author: magniX Type: Article Date:
Product Name: ANSYS Mechanical, ANSYS Maxwell, ANSYS Fluent
Product Category: Electronics, Electronics - Electromechanical, Fluids, Structures, Multiphysics
Industry: Aerospace and Defense
Sub Industry: Aircraft, Aircraft OEMs and Suppliers


View

Arrow

ANSYS 2019 R1 Version up 온라인 세미나 - Electromagnetics-LF Update 발표영상

ANSYS 2019 R1 Maxwell에서 업데이트된 회전 기기 관련 기능과 Multiphysics 기능 그리고 해석 속도에 대한 개선 내용을 소개합니다. 이어, ANSYS 2019 R1 Icepak에서 업데이트된 AEDT Iepak Coupling Update 내용과 Classic Icepak Update 내용을 소개합니다.

Author: ANSYS, Inc. Type: Video Date:
Product Name: ANSYS Icepak, ANSYS Maxwell
Product Category: Electronics


Request

Arrow

Fail-Safe Digital Twin - ANSYS Advantage - V13 I1 - Article

Configurable safety relays help prevent injuries and damage in factory automation systems by cutting off electrical power in response to data received from sensors. When a safety relay fails, the production line must be halted until the relay can be repaired or replaced, resulting in expensive downtime. Phoenix Contact Electronics engineers use ANSYS software to develop a digital twin of its safety relays that will integrate real-time sensor data with simulation results to predict failures in advance. The relay can then be replaced or repaired while the line is not operating.

Author: Phoenix Contact Electronics GmbH Type: Article Date:
Product Name: ANSYS Twin Builder, ANSYS Maxwell, ANSYS SCADE Suite
Product Category: Systems, Electronics, Electronics - Electromechanical, Embedded Software
Industry: Industrial Equipment


View

Arrow

The Path of Least Resistance - ANSYS Advantage - V13 I1 - Article

When lightning strikes an automobile, the metal frame provides the path of least impedance to the ground, protecting the vehicle’s occupants from injury. But as lightning flows over the frame or through the vehicle's electrical systems, it can damage sensitive components or even melt solder joints. The amount of electronics in vehicles is on the rise, so protection from lightning is becoming more important than ever. Fiat Chrysler Automobiles, with support from ESSS, the ANSYS channel partner in South America, uses ANSYS electromagnetic field simulation software to model lightning strikes and predict their impact on vehicle electronics so that future vehicles can be designed to be more resistant to damage.

Author: Fiat Chrysler Automobiles Type: Article Date:
Product Name: ANSYS Maxwell
Product Category: Electronics, Electronics - Electromechanical
Industry: Automotive
Sub Industry: Car and Light Truck OEMs


View

Arrow

Next Generation of Electric Vehicle Motors - The Silent Treatment - ANSYS Advantage - V13 I1 - Article

The switched reluctance motor (SRM) is a potential contender for the next-generation electric vehicle traction motor because of its low cost, high efficiency, and ability to operate at higher temperatures and in other harsh environments. However, SRMs are prone to torque ripple which can generate troublesome noise in vehicles. Continuous Solutions used ANSYS Maxwell electromagnetic simulation software to reduce torque ripple by 90 percent and total noise by 50 percent in an SRM that will be used in the electrification of traction vehicles for agriculture machinery, mining machinery, and civil and tactical applications.

Author: Continuous Solutions LLC Type: Article Date:
Product Name: ANSYS Maxwell, ANSYS Simplorer, ANSYS RMxprt
Product Category: Electronics, Electronics - Electromechanical
Industry: Automotive
Sub Industry: Car and Light Truck OEMs


View

Arrow

Powering Up for the Future - ANSYS Advantage - V13 I1 - Article

Countries around the world increasingly rely on renewable energy technologies for electricity. Brazilian company WEG is a leader in design and production of electric machines including those for renewable energy which requires overcoming a wide range of engineering challenges. WEG Energy leverages the broad portfolio of ANSYS solutions across all aspects of product design, throughout the design process and even during product operation.

Author: WEG Type: Article Date:
Product Name: ANSYS Maxwell, ANSYS Mechanical, ANSYS nCode, ANSYS Workbench, ANSYS CFX, ANSYS CFD
Product Category: Electronics, Electronics - Electromechanical, Fluids, Multiphysics, Structures, Platform
Industry: Energy
Sub Industry: General Industrial Equipment, Thermal Turbomachinery, Wind Turbines


View

Arrow

ANSYS 2019 R1 Maxwell Update

View this on-demand webinar to learn about the new capabilities available in ANSYS Maxwell 2019 R1.

ANSYS Maxwell is our low frequency electromagnetic field solver focused on the design of electric motors, actuators, transformers and electromechanical devices.  New capabilities include a powerful noise-vibration-analysis (NVH) workflow, ability to generate full model post-processing from a partial model solution, new mesh density user controls and much more.

Author: ANSYS Type: Webinar Date:
Product Name: ANSYS Maxwell
Product Category: Electronics


Request

Arrow

Noise, Vibration and Harshness Analysis

Learn how ANSYS Maxwell can be used as part of a multiphysics simulation protocol to reduce noise, vibration and harshness (NVH) caused by wind, powertrain and road noise in moving vehicles.

Author: ANSYS, Inc. Type: Video Date:
Product Name: ANSYS Maxwell
Product Category: Electronics - Electromechanical
Industry: Automotive


View

Arrow

Electric Machine Noise and Vibration

Noise in electric machines can come from many sources and directly affects the perceived quality of a product. And, as one noise source is diminished, other sources become increasingly important. The design of a high-performance electric machine with good sound characteristics, therefore, requires a holistic engineering approach. It involves both the magnetic design of the motor and the structural/acoustic design of the housing and supports. This design process can be analyzed with simulation, which can include the simultaneous optimization of motor and housing parameters to achieve noise goals.

Author: ANSYS, Inc. Type: Application Brief Date:
Product Name: ANSYS Maxwell, ANSYS Mechanical
Product Category: Electronics - Electromechanical
Sub Industry: Electrical and Electronics


View

Arrow

A Comprehensive Approach to System-Level ESD

The performance and reliability of an electronics system largely depend on the system’s immunity from an electrostatic discharge (ESD) event. Because the components, custom chips and package come from various sources — and often from different companies — they are usually designed by separate teams working in silos and in accordance with predefined margins. The ESD Association estimates that damage from electrostatic discharge may range from $500 million to about $5 billion for ruined devices alone. This does not count indirect economic damage, such as system degradation that can negatively impact efficiency and operational issues that can affect customer relationships long-term.

To protect against ESD in complex, high-speed technologies requiring careful signal path design, simulation has become essential in electronics system development. A holistic methodology effectively and efficiently locates and mitigates ESD risks well before hardware prototypes are available, saving teams time, effort and money. This approach can lead to more reliable and efficient systems in crucial applications such as automotive, avionics, 5G and, yes, in-flight entertainment systems. Learn more about the challenges and solutions for addressing system-level ESD in this white paper.

Author: ANSYS, Inc. Type: Application Brief Date:
Product Name: ANSYS PathFinder, ANSYS HFSS, ANSYS Maxwell, ANSYS SIwave, ANSYS Q3D Extractor
Industry: Automotive


Request

1 - 10 Of 140 Results
1 2 3 4 5 14
 
Contact