SAUNA Interface
| Solver |
SAUNA |
| Type of mesh |
multiblock mesh |
| Dimension |
3D |
The interface creates the grid and topology files for the structured flow solver
SAUNA. The translator is written for 3D multiblock meshes only. Supported
information are:
-
Grid file fgrid.xyz (Euler) or nsgrid.xyz (Navier Stokes)
-
Master topology file : topol.3d
-
Part names are assigned to the appropriate sauna block faces
-
Boundary conditions for flow simulation
Select solver
Select solver
SAUNA
in the "Select solver" menu.
Boundary conditions setting
After generating the mesh, boundary conditions can be defined. Supported
boundary conditions are:
Write input
To create the SAUNA input file, "Select
solver" → SAUNA in the
"Output" menu. After clicking "Write input
" you can specify the following options for the interface:
-
Euler or Navier-Stokes grid
-
give the name of the topology file
-
give the name of the boundary condition file
-
give the prefix name for the SAUNA files
The SAUNA files are created in the project directory.
