Introduction to ANSYS CFX

Date June 03, 2013 - June 07, 2013 (5 days)

ANSYS Benelux
Avenue Pasteur 4
B-1300 Wavre
PHONE: 32 (0) 10452861
FAX: 32 (0) 10453009

Fee3750€ (*aca)


The complete Intro to ANSYS CFX training is a 5 day course. 


On day 1, we will focus on the general workflow to perform a simulation.


On day 2 and 3 the training will focus on the CFX solver and how to setup, solve and post-process your results from ANSYS CFX.


On day 4 the training will focus on geometry creation and specifically focus on ANSYS DesignModeler. If you know that you will be using ANSYS DesignModeler, then you should definitely plan on attending day 1 of training. Even if you don't plan on using ANSYS DesignModeler, this day of training could still be helpful since we will discuss some things to think about when creating geometries for CFD analyses and we will also talk about the geometry cleanup tools in ANSYS DesignModeler. If you are unsure if the ANSYS DesignModeler training is right for you, please contact


On day 5 the training will focus on creating your CFD meshes using ANSYS Meshing. If you will be using another program to create your CFD meshes, you may still find this day of training to be helpful because we will talk about some of the important things that you need to consider when creating CFD meshes. If you are unsure if the ANSYS Meshing training is right for you, please contact



This course is intended for people who have had little or no experience with ANSYS CFX. New users of the software should register for the five-day training course which includes the following topics:

  • Day 1: CFD workflow
  • Day 2: Introduction the ANSYS CFX Solver
  • Day 3: Continuation of ANSYS CFX Solver
  • Day 4: Introduction to ANSYS DesignModeler
  • Day 5: Introduction to ANSYS Meshing

The  modules can be booked as individual courses at 750€/day (exc. VAT). A 30% discount is available to academic customers. For commercial customers there are discounts for groups attending the same course. Please contact us for information.


  • A technical education and background is recommended but an engineering degree is not required.

Recommended Follow-on Courses (which is dependent upon the student's interests and applications)

  • Combustion and Radiation Modeling
  • Turbulence Modeling
  • Multiphase Modeling
  • Multiphase Modeling for the Nuclear Industry
  • Fluid Structure Interaction (FSI) Modeling



Additional Course Dates and Locations

April 06, 2015 United States,Texas,Austin
April 07, 2015 United States,Florida,Orlando
May 05, 2015 United States,Minnesota,Bloomington
May 11, 2015 Canada,Ontario,Waterloo
May 20, 2015 Sweden,Göteborg
June 01, 2015 United States,Texas,Houston
June 08, 2015 United States,Illinois,Evanston
June 09, 2015 United States,Michigan,Ann Arbor
June 15, 2015 United States,California,Irvine
June 23, 2015 United States,Pennsylvania,Canonsburg
July 07, 2015 United States,Florida,Orlando
July 13, 2015 Canada,Ontario,Waterloo
July 20, 2015 United States,California,San Jose
July 20, 2015 United States,Texas,Austin
August 17, 2015 United States,Texas,Houston
August 31, 2015 United States,Michigan,Ann Arbor
September 14, 2015 United States,Illinois,Evanston
September 21, 2015 United States,California,Irvine
September 28, 2015 United States,Pennsylvania,Canonsburg
October 06, 2015 United States,Florida,Orlando
October 13, 2015 United States,Texas,Austin
October 26, 2015 Canada,Ontario,Waterloo
October 27, 2015 United States,Texas,Houston
November 02, 2015 United States,California,San Jose
November 03, 2015 United States,Minnesota,Bloomington
December 07, 2015 United States,Pennsylvania,Canonsburg
December 07, 2015 United States,Michigan,Ann Arbor