From Brussels - Central / Nord stations:

• Take the IC (Intercity) train direction Leuven/Liège or Eupen (three departure an hour), until Leuven. Duration: about 20 minutes.
• At Leuven take the bus "De Lijn" 337 direction Wavre, departure every hour '07; the bus station "De Lijn" is next to the railway station. Duration: about 45 minutes.
• Ask for the bus stop "Zoning Nord"; ANSYS Belgium is located in the Wavre Nord Business Park. Walking distance: 3 minutes.

From Namur station:

• Take the IC train direction Bruxelles (two departures every hour). Duration: 25 minutes.
• Change train at Ottignies and take the local train direction Wavre (two departures per hour). Duration : 10 minutes.
• In Wavre station, take the bus "De Lijn" 337, departure every hour '10; or bus "De Lijn" 341 departure at 7:26, 8:26, 10:56, 12:56, 15:26; from the exit of Wavre station, the bus stop is located 50 meters away, right after the plaza. Busses "TEC" E and 22 also run to the Zoning Nord but less frequently. Duration: 7 minutes.
• Ask for the bus stop "Zoning Nord"; ANSYS Belgium is located in the Wavre Nord Business Park. Walking distance: 3 minutes.

By train:

• Take the IR(Inter Region Train) or local train direction Leuven (two departure an hour). Duration: 15 minutes.
• At Leuven take the bus "De Lijn" 337 direction Wavre, departure every hour '07; the bus station "De Lijn" is next to the railway station. Duration: about 45 minutes.
• Ask for the bus stop "Zoning Nord"; ANSYS Belgium is located in the Wavre Nord Business Park. Walking distance: 3 minutes.

By taxi:

• If you want to book a taxi you can contact the Vincent company, e.g., Tel: 00 32-2 653 22 62, mailto: ltvincent@skynet.be, we work with them.

From Brussels:

• Take the motorway E 411 direction Namur.
• Take exit n° 5 bis, Wavre Zoning Nord and turn right, pass the bridge on top of the motorway direction Zoning Nord
• Go straight ahead at the roundabout and follow the Zoning Nord "Les Collines" direction
  
• Turn right at the light. Once you are in the zoning “Les collines”, follow the road, then turn right at the next roundabout, the building is located at number 4, avenue Pasteur. There are signed pointing to the ANSYS building.

From Namur:

• Take the mortorway E 411 direction Brussels.
• Take exit n° 5 Bierges-Rixensart, turn right and drive to the roundabout. From there continue as explained above.